Walking stick holder for the F3

[Smallz]

Does anyone have the capability to design/build a walking stick holder for the F3?

 

[bmccaffrey]

Must be a local Fabrication that can help u out.
Should be a pretty simple design. I would help u out but don't have an F3:dontknow:

 

[Bob Denman]

Two loops on the passenger grab rails... :thumbup:

 

[SPYD3R]

HMMMMMMMM,,,,,,

HMMMMMMMMMM..............
this could be my next project.....

Smallz... just start working what you think you need, and after awhile, you'll surprise yourself with a working finished project...
have faith in yourself... i know you can do it...
good luck...
Dan P
Easley, SC
SPYD3R

 

[Smallz]

I know nothing about metal work and designing around those types of stresses. I figure a couple of dense foam lined c clamps to hold the stick but wouldn't know how to attach it it my bike... I will most likely need it for my first ride. I have seen wheel chair mounts this has to be easier

 

[Smallz]

Bob that would work but I want something that looks customs, where I can easily grab the stick from a seated position and does not interfere with driver or passenger function /comfort... Am I asking to much?

 

[GunDoctor]

Check out Maglight flash light site. They sell C and D cell flashlight holders that can be used.

 

[Chupaca]

Bummer..!!

wish you were closer...but someone local should be able to fix you. :thumbup:

 

[Bob Denman]

Bob that would work but I want something that looks customs, where I can easily grab the stick from a seated position and does not interfere with driver or passenger function /comfort... Am I asking to much?

I normally have one of those folding canes, and it fits in the rear side storage compartments on the RT. :thumbup:
(I used to strap it across the handlebars on my old V-Star...)

 

[SPYD3R]

CANE HOLDER

SMALLZ;
here r some pix of my 'fishing rod holder'... i made it out of PVC pipe, and used Panduit ties to secure it...
i'm certain you can configure something similar for your cane.... opcorn:

Dan P
Easley, SC
SPYD3R

 

[CZPK]

My Crutch holder

This is the first version of my crutch holder.

 

[Smallz]

The PVC pipe is a great idea

 

[SPYD3R]

I FIGURE

I know nothing about metal work and designing around those types of stresses. I figure a couple of dense foam lined c clamps to hold the stick but wouldn't know how to attach it it my bike... I will most likely need it for my first ride. I have seen wheel chair mounts this has to be easier

Smallz... you stated; "I figure a couple of dense foam lined c clamps"....
see, i told you, if you start working it, you'll figure it out... with the 'c clamps' you are half way there already.... keep going pal, all of us here on SPYDERLOVERS will be watching for your success.... :clap:
Dan P
Easley, SC
SPYD3R