front pegs on rt

[Questions]

has anyone out there installed anything instead of the stock front pegs??? I luv the widow pegs but cant find an adapter to work
no one seems to think that on an rt there is one

 

[Dragonrider]

Kury has adaptors that will work for all of their products. HOWEVER, for me, the only choice was a set of Seal Floorboards. Nothing better for the RT - I had them on my 2010, and they were the 2nd thing I put on my 2014....

This is assuming you don't have a bike with the Cr@##$ BRP boards - if you have those, you are stuck with them...

 

[joebryanjr]

I switched to "Spyder Legs" footboards on my 2014 RT. LOVE THEM!

 

[fastfraser]

The best way to get the Widow pegs is to add hyway brackets as I pretty sure you will have trouble changing the stock pegs .:dontknow:

 

[BLUEKNIGHT911]

NOT PEGS ....BUT

has anyone out there installed anything instead of the stock front pegs??? I luv the widow pegs but cant find an adapter to work
no one seems to think that on an rt there is one

:dontknow:....I bought the Basic 14 RT , so I didn't get floorboards. I made some from 3/16th Diamond plate Aluminum....and they bolt onto the OEM pegs after re-moving the rubber PADS ......very comfortable , and very in-expensive ( I know someone with a PLASMA-CUTTER ).......................just sayin ,.....Mike :thumbup:

 

[DrewNJ]

Aren't the RT pegs fixed or bolted directly to the mount? Not a traditional motorcycle peg mount?
Seems like you could bolt up any of the kury pegs but your likely to have to fab up your own fixed mount.

 

[Bob Denman]

:agree: They're solid to all of the mounting hardware...
Which on the right side of the bike; also is the pivot point for the brake pedal. :yikes:
(I wouldn't suggest monkeying around with that too much...)

 

[Dragonrider]

The Kury part # for the Spyder[TABLE="width: 375"]
[TR="class: partRow 7939"]
[TD="class: prodTableCellItem"]7939[/TD]
[TD="class: prodTableCellDesc"]Front Tapered Peg Adapters (pr)[/TD]
[TD="class: prodTableCellPrice"]$26.99[/TD]
[/TR]
[/TABLE]

 

[Bob Denman]

:nopic: :2thumbs: