My mods are a pay as you go. So I do alot of thinking before I decide what to do next. My next mod will probably be risers. My question is this: Instead of cutting the stock bar flush, if I leave some sticking out, would that be functional for mounting future mods? Like Gps, Stereo, Alarm or speakers, etc? Or would it look too weird? Any and all input would be appreciated.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Need your input on NMN 4" risers?
- Thread starter Capt John
- Start date
NancysToy
Motorbike Professor
I think the stubs would pretty much disappear with the black risers, since the original handlebar is black. What do you have to lose if you try? You would just have to remove the risers and cut them closer if you don't lke them. Easy place to add a RAM mount, for sure.
-Scotty
-Scotty
I just installed the 4 inch risers and I didn't have much cable to play with. That would be the only issue. Also if you leave the space next to the riser you might not be able to put much because the riser itself will be in the way. Don't forget you got the spot on the left handle bar where there is a black spacer
That would be effgjamis. He left just enough to mount any future additions. I really doesn't look bad and is really only noticeable if you're looking for it.
You could also consider a clutch cover ram mount, that's how I've mounted my GPS.
