• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

New Question - squeaky throtle

Here's the thing..!!

the grip is over a tube that fits over the handle bar and fits into the right commad. If it is squeaking it could be the grip is rubbing against the command or the bar end. A spritz of WD40 at those points will clear that up. You could also loosen the holding screws on the command and wiggle the assembly about to clear any debris and retighten...:thumbup:
 
the grip is over a tube that fits over the handle bar and fits into the right commad. If it is squeaking it could be the grip is rubbing against the command or the bar end. A spritz of WD40 at those points will clear that up. You could also loosen the holding screws on the command and wiggle the assembly about to clear any debris and retighten...:thumbup:

Hummm, sounds good. I thought about unbolting the assembly, taking it apart, and greasing the handle bar and cleaning out the part that rests inside the command. Just wanted to make sure I wasn't making a big mistake by doing so. I don't get along well with WD-40, I am kinda worried about where it might migrate to, but this might be the easiset solution. Thanks for the reply!
 
I would not spray WD40 near or under

the throttle grip, it may cause more headaches in the future than it is worth. How about just stopping by the dealer and see what they say? I would think its under warranty.
 
Back
Top