• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

erasing preset stations on a Can-AM RT-S Radio

dfox

New member
I just purchased a 2011 Can-AM RT-S and love it. I have discovered one problem however that I have not been able to figure out. The previous owner set 12 of the 15 preset stations for his area. I have been able to add 3 for my location but I cannot figure out how to erase his presets.
Anybody figure this out?
 
Good luck with that. I have a 2013 RT LTD with the same problem. At some point I may disconnect my battery to see if that will erase all of the presets so that I can start over.
 
I think I remember from some previous discussion that there is no way to erase a preset station (DUMB - DUMB - DUMB) and that you can only overwrite them.

Now is that stupid or what?

Carl
 
:agree:

I have even had the problem where station information will update the display and will not let me set the pre-set to one of the higher numbers. This is not a very user friendly design for the radio's user interface.
 
You have to overwrite them. It's a major pain too. There for sure is a bug here in the software.
What will happen is once you tune in the radio station manually and press the down arrow to set it, when your scrolling through the preset numbers, "sometimes" it wont let you do it and the number keeps going back to the last open preset or to preset 1.

The tip I found is set ALL the presets so there is none left (I used very high station numbers to do this). Then it seems to let you overwrite anyone you want. Also do not set a preset and then try to set the same radio station to another preset. e.g. setting 2 to the same station. It wont let you do that.

Again the code here is super flaky!

Bob
 
Last edited:
Radio Supplier

You have to overwrite them. It's a major pain too. There for sure is a bug here in the software.
What will happen is once you tune in the radio station manually and press the down arrow to set it, when your scrolling through the preset numbers, "sometimes" it wont let you do it and the number keeps going back to the last open preset or to preset 1.

The tip I found is set ALL the presets so there is none left (I used very high station numbers to do this). Then it seems to let you overwrite anyone you want. Also do not set a preset and then try to set the same radio station to another preset. e.g. setting 2 to the same station. It wont let you do that.

Again the code here is super flaky!

Bob

FYI

http://www.radiosound.com/customer_service.php
 
Overwrite only.

I use this procedure from the Quick Reference Booklet and it works for me to overwrite. I have not found a way to erase.

Scan_Pic0045.jpg
 
Thanks for all of the great feedback!

It's reassuring to discover that I'm not the only one having this problem. It doesn't fix the problem, but it is allows me to let it go.
 
THANK YOU!

I thought I was the only one who was having so much trouble with the radio. It drives me crazy!!!! :gaah:

Maybe with these instructions I can manage to change that.
 
What will happen is once you tune in the radio station manually and press the down arrow to set it, when your scrolling through the preset numbers, "sometimes" it wont let you do it and the number keeps going back to the last open preset or to preset 1.

What was causing this to occur for me is when I was setting a station that published "information" (e.g. song name, artist, etc.). Once the display would update to show the information it would reset to preset 1. Very bad design for the the user interface. Obviously the people who build the radio has not used it.
 
What else would you expect from BRP?

Sheesh Dave! I have only been here a short time and no offense but your kind of a downer!
I know your not happy with you BRP experience but why bring everyone else that is enjoying themselves down?
Do you really have that much time on your hands and hate, to spend that much time on bringing negative?

Just sayin.....

Sometimes a positive attitude can bring happiness!


Bob
 
Last edited:
Dave,

No offense, but I have enjoyed most aspects of my Spyder. The only thing that I am disappointed in is the radio and comm system. I would have expected more for those. However, I have had nothing but good experiences with the rest of the bike.

I sincerely hope you find the root of your issues and get them worked out so you can enjoy your ride as much as the majority of us do.

Regards,
BitSlayer
 
Pre -Set Radio Stations

I just purchased a 2011 Can-AM RT-S and love it. I have discovered one problem however that I have not been able to figure out. The previous owner set 12 of the 15 preset stations for his area. I have been able to add 3 for my location but I cannot figure out how to erase his presets.
Anybody figure this out?
Did you look in the owners manual? ( Just trying to help) Deanna777
 
I just purchased a 2011 Can-AM RT-S and love it. I have discovered one problem however that I have not been able to figure out. The previous owner set 12 of the 15 preset stations for his area. I have been able to add 3 for my location but I cannot figure out how to erase his presets.
Anybody figure this out?
You can preset????I am lazy and just push the right arrow to get the next station that I can hear, If I don't like it I push it again.
 
can not be done the definitive answer

So with this question coming up quite a bit, I emailed the radio manufacture/supplier of the BRB radio's

This is their response and I guess John Smith really does exist. (I altered the email so it couldn't be scraped)


You cannot delete preset radio stations. But you can overwrite any station in memory with another station of your choice. Even is there was a way to reset the radio, there would be default stations stored in each memory location.

If you have any other questions, I will be happy to assist you.

Best regards,

John Smith
Senior Technical Advisor
johns AT radiosound dot com


Personally I have never set a preset I just use the scan feature to locate a station as I travel (when not using the iPod).

harry :thumbup:
 
Like the fact that it will only control Ipod crap! Do they think everybody owns apple junk? Even my 02 Wing would control a standard MP3 player!
 
How do you get it to scan to another station not on preset. Mine will only scan to the next preset station. I am limited to about 5 stations with no way to search and add more. This is the only frustrating thing I have had to deal with. My Spyder is trying very hard to make me like country music since that is the only station it will let me listen to.
 
How do you get it to scan to another station not on preset. Mine will only scan to the next preset station. I am limited to about 5 stations with no way to search and add more. This is the only frustrating thing I have had to deal with. My Spyder is trying very hard to make me like country music since that is the only station it will let me listen to.

Depress the button longer.
 
Back
Top