• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

New Farkle today

jonnysevel

jonnysevel

New member
So today I tackled the spyderpops bump skid plate and the tricLED perimeter LED kit for the plate. Was a fairly easy job and pretty straight forward. I love the way she looks now and I am happy to have the protection of the bump skid plate!ImageUploadedByTapatalk1389578662.011390.jpg
 
Nicely done..!!

looks great..though in the dark and lit up can't see how they are mounted. Do they go between the bumpskid and the air dam or on the bumpskid edge..?? :2thumbs:
 
Sorry... Just looked so cool at night. Will take more pics tomorrow.. The LED strip is mounted on the edge of the bump skid plate. I then wired it into the wires coming from the fender lights. I am not real happy with where the wire had to be routed and I might change that to clean it up. I cut the wires and soldered the new LED wires on
 
jonnysevel said:
Sorry... Just looked so cool at night. Will take more pics tomorrow.. The LED strip is mounted on the edge of the bump skid plate. I then wired it into the wires coming from the fender lights. I am not real happy with where the wire had to be routed and I might change that to clean it up. I cut the wires and soldered the new LED wires on
Click to expand...


More pics of the leds in the daylight so we can see how they are mounted would be great.

I like these but was concerned with mounting them on the edge of the bumpskid due to the rounded edge. Was not sure the LED strip would adhere well. Your thoughts on this?
 
jcthorne said:
More pics of the leds in the daylight so we can see how they are mounted would be great.

I like these but was concerned with mounting them on the edge of the bumpskid due to the rounded edge. Was not sure the LED strip would adhere well. Your thoughts on this?
Click to expand...

If you use the primer, the strip does adhere really well. It is really flexible. I would suggest u put the LED's on before you install the bump skid on the bike. Also, install the LED where it is warm so they stay really playable
 
You must log in or register to reply here.

Similar threads

G
Any Skid Pan Recommendations for a 2022 Ryker Sport?
Replies
2
Views
583
gbyoung2
G
Snoking1127
Installed a new General Altimax R45 today - My tips!
Replies
4
Views
541
PW2013STL
PW2013STL
Y
Is a rear suspension upgrade needed. 2017 RT
Replies
3
Views
657
Yspyder
Y
J
F3T rear shock needed - will an RT Shock fit?
Replies
11
Views
500
jvs04
J
LongIsland
HowTo: Here's how to Clean up your trailer wiring!
Replies
1
Views
3K
DGoebel
DGoebel
Back
Top