• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

No Gears

Fonz

New member
Rode my bike today, and it would only go in 3rd gesr. No neutral, no other gears. Anyone had that happen to them ?
 
Which one do you have?:dontknow::dontknow::dontknow::dontknow::dontknow::dontknow::dontknow::dontknow::dontknow:
 
Check to see if the shift lever came off the shaft where the linkage runs to the transmission on the left side behind the footpeg assembly. Also check that your oil level is correct. If it is neither of those it could be an electrical problem with your shift paddle....or some more obscure causes.
 
First think I would check is the oil level. If you have the SE5 they have been known to be picky about the oil level.



Sent from my SCH-I545 using Tapatalk
 
Have to agree..!!

with Scotty..check the linkage and oil. On the se5 models you don't feel the shift like the sm5 so it's harder to notice if the shift shaft is operating. If both are good you need to take her in...good luck..:thumbup:
 
Had the same thing last summer. RT 2013 , shift cable came of shaft. Had to manually get it back to mutual , before putting it back on , so it would line up properly .
 
Back
Top