BuddaBelly
New member
Wife just told me she is going to order me a sway :bar for my birthday. She is such a good girl
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
BajaRon Sway Bar
- Thread starter BuddaBelly
- Start date
spydercowboy
New member
Wife and I just put one on. Took right at 2 hours going slow so not to mess up. It's not that hard. Was a little confusing about lifting to frunk up and out. What we ended up doing seem more like just lifting up and then put some blocks of wood in place to keep it there. You'll see once you get there.
Bob Denman
New member
Thanks for that mounting advice! :2thumbs:
When my "window of opportunity" opens; I've got to be ready to jump through it with wrenches in both hands! :thumbup:
Budda,
She's a keeper; no doubt about that! :clap:
When my "window of opportunity" opens; I've got to be ready to jump through it with wrenches in both hands! :thumbup:
Budda,
She's a keeper; no doubt about that! :clap:
ringalls51
New member
Graphite
hi I bought and installed the sway bar just love it on turns. I was wondering does the plastic bushing need lubrication like liquid graphite. first thought of oil but that would or could cause the plastic bushing to break. the bars that bolt to the end of the bar. oil with be great for that movement. does anyone else have any ideas on this subject.
hi I bought and installed the sway bar just love it on turns. I was wondering does the plastic bushing need lubrication like liquid graphite. first thought of oil but that would or could cause the plastic bushing to break. the bars that bolt to the end of the bar. oil with be great for that movement. does anyone else have any ideas on this subject.
BajaRon
Well-known member
The silicone rubber bushings supplied with the Sway Bar kit do not need any grease or lube. If you do use something make sure it is silicone based or synthetic. Petroleum based products will destroy the bushings. If I were going to do it I would use a silicone spray since there is no good way to grease the bushings once they are installed, and grease will attract dirt.
They grease Poly bushings because they squeak.
ringalls51
New member
thanks now I know do nothing at all.
BajaRon
Well-known member
That is exactly what I recommend. That and enjoy the ride!
The Bakerman
New member
Baja Ron Anti-Sway Bar
I installed mine a couple of months ago and the handling difference is amazing. I'm able to handle curves faster and with more stability than the original. I feel more in control and safer than before. The best mod I've installed, by far. Would recommend it to everyone
I installed mine a couple of months ago and the handling difference is amazing. I'm able to handle curves faster and with more stability than the original. I feel more in control and safer than before. The best mod I've installed, by far. Would recommend it to everyone
GeoffCee
New member
I am waiting for Ron's second production run of swaybars to be available before I can place my order. Went out for our 1st ride of 2013 today on a twisty route through Wales as the temperature climbed to a "balmy" 10 Celsius and I wondered as I traveled through those Welsh bends in the road how they will feel with the new bar fitted. I haven't read a single adverse comment on SpyderLovers from those who already have Ron's bar. This is an amazing testimony to its effectiveness! :thumbup:
Cavman
Active member
Well, I got mine about a month ago. Was one of the first. I finally got around to installing it today. I recommend jacking the RT up as far as you can to see what you are doing under there. I put my front wheels on concrete blocks.
It was pretty straight forward in the installation. Getting it aligned was a bit tricky because you can't stand back and look at it. Your face is up close under the bike trying to see things.
Putting the Bumpskid back on was a real booger, getting those screws to align back up. :banghead:
I took the bike for a thrashing in a parking lot. First time I felt like the Spyder was trying to throw me off. Wow! It was great! THANKS Ron!
Now to figure out how to install the rear brake pads I got from Ron?
It was pretty straight forward in the installation. Getting it aligned was a bit tricky because you can't stand back and look at it. Your face is up close under the bike trying to see things.
Putting the Bumpskid back on was a real booger, getting those screws to align back up. :banghead:
I took the bike for a thrashing in a parking lot. First time I felt like the Spyder was trying to throw me off. Wow! It was great! THANKS Ron!
Now to figure out how to install the rear brake pads I got from Ron?
Last edited:
BajaRon
Well-known member
A little clarification on this would help! :yikes:
Cavman
Active member
Ron, I was doing some aggressive turns like they made us do when I took the GWRRA Trike driving class several months ago. Back then, the Spyder would really lean and was a bit sloppy. Now it's a lot stiffer. And I can feel more lateral forces on my body. The Spyder corners a whole lot better and at a faster rate. I like it....more control.
Maybe I shouldn't have used the word "thrashing" in my post? "Flogging" wouldn't have been much better either.
Maybe I shouldn't have used the word "thrashing" in my post? "Flogging" wouldn't have been much better either.
BajaRon
Well-known member
Ron, I was doing some aggressive turns like they made us do when I took the GWRRA Trike driving class several months ago. Back then, the Spyder would really lean and was a bit sloppy. Now it's a lot stiffer. And I can feel more lateral forces on my body. The Spyder corners a whole lot better and at a faster rate. I like it....more control.
Maybe I shouldn't have used the word "thrashing" in my post? "Flogging" wouldn't have been much better either.
It wasn't the 'Thrashing' that got my attention. I like to thrash my Spyder in the twisties as well. It was the 'Throwing me off' that got my attention!
Bob Denman
New member
Do they make Grip Puppies in velcro? :shocked:
We don't want to lose you when the roads get interesting! :thumbup:
We don't want to lose you when the roads get interesting! :thumbup:
I installed Rons sway bar on my 2010 RT last week. Temp here is 48 and windy, but warmer than it has been since the install. Took the RT thru the twisties a few mins. ago and what a difference. Took the curves about 15 mph faster than I used to and if the roads weren't salt slick I could have pushed it harder. The sway bar plus Elkas all around made the handling amazing. Come on Spring!
flybuddy
New member
You can always head south...it was a bit cooler here today, only hit 85.
I have had my RT for a year and have been very satisfied with the ride and cornering with everything stock. After reading all the reviews of the BajaRon new sway bar I took the plunge. I ride with a large group twice a week for about 200 miles each ride and today was first time after installation. There is a HUGE DIFFERENCE in cornering and this is a must have for everyone. I lead the group and most said the RT hardly leans at all going around corners especially at the higher speeds.
Thanks Ron.
Thanks Ron.
Similar threads
