Juice Box Pro Question

[KyleKruko44]

So installed my Two Bros Dual Carbon Fiber pipes and juice box pro yesterday. They sound and look great. They only question i have is, what is the stock position for the dial adjustments on the juice box, I am assuming that they should be right in the middle so you can either add or take away but I just wanted to make sure. thanks for the help.

 

[5PYD3R]

Look in your instructions, there should be a chart that tells you where to set the dial to. I believe it would be 3 for you. The other dials you will just leave where they were unless you want to fine tune it. Mine seemed to run fine at setting three and I did not mess with the other dials.

 

[KyleKruko44]

Look in your instructions, there should be a chart that tells you where to set the dial to. I believe it would be 3 for you. The other dials you will just leave where they were unless you want to fine tune it. Mine seemed to run fine at setting three and I did not mess with the other dials.

right, i know im supposed to be on 3 for the mapping. I just want to make sure that the other 3 dials for fine tuning are where they are suppose to be.

 

[WackyDan]

The other three dials are for adding or subtracting fuel during different rpm ranges....

Map three is from their own dyno testing... and should be all you need. Tinkering with the rest is asking to run too lean or too rich.

 

[KyleKruko44]

Right, so I completely understand what each adjustment dial is for. My question was where the default positions are. I just want to make sure that they are where they are supposed to be.

 

[5PYD3R]

Gotcha. Well I just looked at mine and they are all set to the mid point. This is how they were set from TBR. You should see two dots on each dial? Both dots should be at the top for each dial which is mid range.

 

[darren]

Gotcha. Well I just looked at mine and they are all set to the mid point. This is how they were set from TBR. You should see two dots on each dial? Both dots should be at the top for each dial which is mid range.

Thanks for that its nice to know im not the only one who has this problem, myself I think I need a glass's it is very hard to see the dot TBR should make it easier to see thankyou