GPS Zumo 660

[smporter420]

This is what I have for my mount on my '12 RS-S. I was looking at getting a Zumo 660. What I was wondering if this is the mount that comes with the GPS. I had the 12v power adapter installed in the frunk. Is there a mount like the one below that will work with a lighter adapter that comes with the GPS? Also can the GPS be used with this mount while being wired directly to the bike? Dont want the wires to catch on handlebars. Any suggestions on where I should run the wires if I was to use this harness or what is the best way to run power source.

 

[Canlogic]

Looks about the same as the mount on my 2011 RSS. Mine was done at the dealer as part of my purchase agreement. The wires were run down the back side of the handle bars and are hidden and out of the way. My bike is stored a t a friends for the winter so can' take any pics. The 660 works great.

 

[smporter420]

Zumo Mount

http://www.touratech-usa.com/Store/PN-065-0521/TOURATECH-Zumo-660-665-handlebar-mount-Locking-Black

This looks like a nice mount.

 

[Squadcarman]

Zumo 660

It looks like the same connector that is on m 2011 Limited. You will need to install it into the audio system if you want the Gps audio to override the radio. If you want to use the blue tooth for your phone, you will also need to have it wired into your bike completely. Mine also came with a kit to use with a cigarette lighter in another vehicle.

 

[smporter420]

It looks like the same connector that is on m 2011 Limited. You will need to install it into the audio system if you want the Gps audio to override the radio. If you want to use the blue tooth for your phone, you will also need to have it wired into your bike completely. Mine also came with a kit to use with a cigarette lighter in another vehicle.

Will be putting it on an 2012 RS-S. Just gonna use a blutooth device for navigation

 

[smporter420]

Will that harness wire into the RS-S for a power source?

 

[Canlogic]

yes it will.