-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
3M protection film.
- Thread starter illuzion
- Start date
illuzion
New member
Thanks for the advice! I will look for a tinting place.
Fire Joe
MOgang Member
www.xpel.com
That's where I went to find an authorized installer in my area. They use something along the lines of the 3M clear film. They have the pattern for the Spyder available so it should make it easier to install, no cutting involved. Not sure though if they have the RT pattern, but I know they have the RS as it is what I have. Have had mine installed for a little over 3 months now and so far so good. It's holding up real well.
That's where I went to find an authorized installer in my area. They use something along the lines of the 3M clear film. They have the pattern for the Spyder available so it should make it easier to install, no cutting involved. Not sure though if they have the RT pattern, but I know they have the RS as it is what I have. Have had mine installed for a little over 3 months now and so far so good. It's holding up real well.
illuzion
New member
Thanks Fire Joe! I have an RS also. Ideally, I wouldn't mind just getting the hood of the Spyder protected. Or possibly cover all of the yellow portions since it's in the front. Since I have a black & yellow spyder.
Fire Joe
MOgang Member
It's what I did, just the hood and front fenders. Figured everything else is well protected plus they're on the sides. Good thing about them having the pattern is you can pick and choose what pieces you want :thumbup:
illuzion
New member
How does it work out when you wash it? I myself like to use Pledge wipes to clean my Spyder. Would that still work out for the protective film? :2thumbs:
Fire Joe
MOgang Member
I am pretty sure it will. I treat it pretty much as an extra coating of clear coat and that is what the installer told me as well. I don't use Pledge wipes so I can say 100% sure though. As for cleaning, I wash my Spyder and wax it. Wax gets applied right over the film on the pieces that have it and gets buffed out as well. So far there is no harm done to the film that I can tell and because it pretty much is like clear coat, I like how it shines when I am done cleaning and waxing it :thumbup: Though of course that pretty much only lasts until my next long ride when it gets covered with bugs :roflblack:
illuzion
New member
Thanks Rejex representative! :2thumbs:
Similar threads
