-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Spyderpops
- Thread starter Roy's Bassets
- Start date
wyliec
New member
Remove the bottom plate. Two bolts into center channel of spyder and one torx head at right front of bottom plate. Then, use the template on the top side of bottom plate. The instructions show where to place the template. Once installed, you can see the e-scoop when you look under. That is if I installed properly.
That bottom plate is below the radiator.
Last edited:
What e-scoop? What is that?
Roger
New member
The e-scoop is part of the Air Management system.
I've been talking with Harvey and I think that I've got it figured out. I'll know better when I get home tonight.ray:
Do i have to ride up their and help you?
Damn ... I was wondering why I got some rivits left. Thought those were extras. Went home last night and re-read the instruction and see what you were talking about. I think I am missing a piece.:gaah:
pjp623
Member
I ended up with one extra rivit from the kit but I also put in extras that I had just to be sure. If you have 5 then you haven't gone on to page 2 and put the e-scoop--small black rectangular scoop-- in. It's what the template on page 2 was for. It's not very difficult and goes on the floor section. Only 3 nuts to remove and that panel drops right out. Just don't forget which is the top of that piece and mark it before you rivit the scoop in place. If you don't have the scoop, I'm sure that Harvey will get it right to you, If you e-mail him he's very prompt about getting back to you.
Good luck. :thumbup:
Good luck. :thumbup:
SPYDERPOPS
SpyderLovers Sponsor
The now "Missing" E-Scoop is on it's way!
There is an extra rivet and washer in every set!
Harvey
There is an extra rivet and washer in every set!
Harvey
SPYDERPOPS
SpyderLovers Sponsor
Finally got a chance to work on the instructions and they are now on the website. www.spyderpops.com
Fixed the picture clarity and added more information to make them a little clearer.
It's hard to describe something that you are so used to doing and never think just hard the first time was. I remember turning those screws and then scratching my head, then got the grandson to hold the nuts with his small hands.
Harvey
bjt
Very Helpful Member
+1
Similar threads
- Locked
- Sticky
