Socket set recommendations

[Bitten]

So, I installed my green Glo-Ryder wheel caps and they look wicked...

My first attempt at installation included jacking one side of the bike up using my Hummer's jack. That's when I noticed I didn't have a socket set that would fit the lug nuts... So, I lowered it and just used a thing flat head screwdriver to pop off the caps...

Soooo, that leads me to my question. I stopped by the dealer in Richardson, TX and they told me that a 13/16 socket would do the trick on the lug nuts. Does anyone have a recommendation for a socket set that's not too pricey?

Thanks in advance!

 

[Firefly]

So, I installed my green Glo-Ryder wheel caps and they look wicked...

My first attempt at installation included jacking one side of the bike up using my Hummer's jack. That's when I noticed I didn't have a socket set that would fit the lug nuts... So, I lowered it and just used a thing flat head screwdriver to pop off the caps...

Soooo, that leads me to my question. I stopped by the dealer in Richardson, TX and they told me that a 13/16 socket would do the trick on the lug nuts. Does anyone have a recommendation for a socket set that's not too pricey?

Thanks in advance!

While that might work--- they're 21 MM as everything is metric on this bike. I like to stick with Craftsman -- if any of the tools break they replace them--- no receipt needed---- just take the broken tool in and get a new one.

NOTE: They now have a lower-end 'craftsman' 'eco' or something they sell--- while it also has a lifetime replacement warranty you MUST have your receipt with you for any warranty work.

When Sears has one of their sales you can usually get a great set for close to 1/2 price. The bigger sockets I bought as individuals.

 

[NancysToy]

Can't go wrong with Craftsman (Sears). Guaranteed for life, readily available, and you can buy one piece at a time if you can't afford a set right now. Sets are cheaper though, and Sears' sales are usually quite good. Remember, good tools will last you a lifetime. I'm still using some I inherited from my old man! :thumbup:

 

[Bitten]

Thanks so much!
I looked everywhere online and in the manual and found zero about the size of the lug nuts... Doh!

Figured it was a simple question - but maybe needed to be asked to it will show up on the next guy's search...

BTW - the Glo Ryders look awesome!

 

[boborgera]

:agree:

Can't go wrong with Craftsman (Sears). Guaranteed for life, readily available, and you can buy one piece at a time if you can't afford a set right now. Sets are cheaper though, and Sears' sales are usually quite good. Remember, good tools will last you a lifetime. I'm still using some I inherited from my old man! :thumbup:

:agree:Good tools are the key to getting a job done right the first time.

 

[Firefly]

Thanks so much!
I looked everywhere online and in the manual and found zero about the size of the lug nuts... Doh!

Figured it was a simple question - but maybe needed to be asked to it will show up on the next guy's search...

BTW - the Glo Ryders look awesome!

Yeah--- that drove me nuts too... they don't list sizes very well at all.

Front Lug nuts = 21 mm
Rear Axel = 36 mm --- handy to have 2 of them.:thumbup:

 

[ataDude]

...
Rear Axel = 35 mm --- handy to have 2 of them.:thumbup:

Hmmmmm... it's been a while but I swear mine was 36mm.

.

 

[boborgera]

Hmmmmm... it's been a while but I swear mine was 36mm.

.

Yep, 36mm, :spyder:

 

[Firefly]

CORRECTED it--- had a typo----

Sorry about that---- slippery fingers today.

36 MM is correct!

 

[rnet]

Can't go wrong with Craftsman (Sears). Guaranteed for life, readily available, and you can buy one piece at a time if you can't afford a set right now. Sets are cheaper though, and Sears' sales are usually quite good. Remember, good tools will last you a lifetime. I'm still using some I inherited from my old man! :thumbup:

We have a different saying here in NY. Guaranteed to break for life.:roflblack: I do have some sockets and wrenches, but I got tired of taking the screwdrivers back.

 

[NancysToy]

We have a different saying here in NY. Guaranteed to break for life.:roflblack: I do have some sockets and wrenches, but I got tired of taking the screwdrivers back.

Yeah, the screwdrivers aren't so hot, although they have lasted longer than most of my others...with a little dressing once in a while. My favorite ratchet is not a Craftsman, either, but it has lasted 45+ years, and has outlived at least three Craftsman ratchets that wore out and needed to be replaced with rebuilts (actually, they used to just provide a repair kit). I have broken very few Craftsman hand tools in the 50+ years I have been using them, though...mostly my fault (abuse, breaker bar extensions, etc.). All were replaced without question. I have no complaints.

 

[rnet]

Yeah, the screwdrivers aren't so hot, although they have lasted longer than most of my others...with a little dressing once in a while. My favorite ratchet is not a Craftsman, either, but it has lasted 45+ years, and has outlived at least three Craftsman ratchets that wore out and needed to be replaced with rebuilts (actually, they used to just provide a repair kit). I have broken very few Craftsman hand tools in the 50+ years I have been using them, though...mostly my fault (abuse, breaker bar extensions, etc.). All were replaced without question. I have no complaints.

Yep you have hit on there weak tools and I'll add one more, swivels, but generally they are a decent tool. Lately I've been buying Gearwench tools at Advanced Auto (commercial Account there) and so far so good and a lifetime guarentee. Sometimes on Ebay.