Can I use the blank switch for Accessory power/spotlights on my 2023 F3S? What are the wires already attached?

[Tamingdoom]

I'm looking to fit manually switched spotlights to '23 F3S.
What is the blank switch cover on the dash (see photo)? I lifted it and it has 4 wires attached to a blanking plug - why??
I wanted to use this location with a flush fitting switch (like my heated grips switch on opposite side to ignition s/w)
Is there a part number for one of these switches?

Thanks.

 

[Jetfixer]

That is the connection and installation location for the factory fog lights switch. It will work well for what you want.

 

[Tamingdoom]

Ahh... thanks.
What colours do what? It looks like there's four wires?
Where is the power delivered to/or where do I hook the spotlights into?
What colour is live & what is ground?

I'm not very techie, as you can tell..

 

[Snoking1127]

You need to buy a multi-meter and learn how to use it. Buy one at an auto supply store and ask them to show you how to use it.
1. How to read DC volt on your car battery right there on their lot.
2. How to do continuity test on the Ohm setting.

https://www.autozone.com/p/innova-multimeter-3306n/64471?searchText=multi-meter&productPartGroupId=50738&productBrandId=FCHR&productUniqueId=7027780308

Youtube should have training videos also.

 

[Snowbelt Spyder]

I'm looking to fit manually switched spotlights to '23 F3S.
What is the blank switch cover on the dash (see photo)? I lifted it and it has 4 wires attached to a blanking plug - why??
I wanted to use this location with a flush fitting switch (like my heated grips switch on opposite side to ignition s/w)
Is there a part number for one of these switches?

Thanks.

View attachment 256504

Hey Bud. Would you like to just keep it simple? The wiring harness and relay are already installed on your F3 for mounting the lights in the factory location. That circuit has a low beam and fog light function. However, the factory kit is pretty pricey. 710 bucks US. Just the switch is $140. This kit is much more economical. Plug and play, including a nice looking switch for that spot… and you don’t have to go buy a multi-meter.

Can-Am Spyder F3 LED Fog Light / Arc Running Light Kit

Enhance the front end of your Spyder F3 with this replacement F3 LED Fog Light Kit

www.slingmods.com

 

[Elqueso2]

Yes, I did use it for my Aux spotlights. You can buy the switch in any configuration you want and it fits perfectly! The internal LEDs in the switch are very close to the factory illumination color of amber.

I bought it from https://www.otrattw.net/L-SERIES-DRIVING-LIGHTS-LOWER-LED-INDEPENDENT-L11N5-57U.html