Visor fog

[bone crusher]

I use Hockey Visor Spray. I-Tech is about $8 a 4 oz bottle but I find that Fog-off works well too. I just switch the bottle from my hockey bag to my saddle bag. I find I have to apply it each time I go out, but a light quick wipe lasts the entire day.

I use the product from Rain-X...the fog-off or whatever it is called (haven't looked at the bottle for a while)...haven't had a problem since...does a good job. I also put rain-x on the outside as it helps to push water off the helmet faster...

 

[boborgera]

Best and the only thing always worked and available for me Spit hahah well try it sometimes clean the inside with your spit you well never have fog issues again. I been doing this for long time


Happy New Year

Ravi

Hope you don't chew Red Man, Actually dog snot work's well too.:roflblack:

 

[Ravi4l]

Yeah maybe I’ll get dog just for that reason, hahah


But on side note if you look @ swimmers they lick there goggles before they swim they never have fog issues.

 

[boborgera]

Ye hahah

,
But on side note if you look @ swimmers they lick there goggles before they swim they never have fog issues.

That's where they hide the steroids.hyea:

 

[BajaRon]

I didn't see where you said which helmet you have. Arai, KBC and others make a breath guard that keeps your breath from going up into the shield, glasses area. If you have a helmet that will take one of these optional breath guards that should solve your problems and it is about the least expensive way to go as well.

 

[Dochands]

Shoei but I'll check it out.

I wondered about spit. Its what we do when we scuba dive. lol

 

[BajaRon]

Shoei but I'll check it out.

I wondered about spit. Its what we do when we scuba dive. lol

You're right about the spit and scuba diving....never worked as well for me in a motorcycle shield. :dontknow:

I'm not as familiar with the Shoei products as I am with Arai but try this web site.

Shoei® Breath Guard And Chin Curtain

 

[NancysToy]

You're right about the spit and scuba diving....never worked as well for me in a motorcycle shield. :dontknow:

I'm not as familiar with the Shoei products as I am with Arai but try this web site.

Shoei® Breath Guard And Chin Curtain

I agree about the SCUBA masks. As a former SCUBA instructor, I always used this method. Never worked for me with motorcycle helmets, goggles, or glasses, though, either.

One other note. The tight, winter breath guards can certainly help, especially on the faceshield, but they are not 100% effective. The ones with a bendable srtip at the nose, to keep them tight, are best. If you use a chin curtain, your glasses seem to fog no matter what you do. When I wear my chin curtain, I have to either remove my glasses, or open the face shield about 3/4".

 

[Dochands]

I have installed my chin curtain and I figured that did not help. I do have a baclava with a heat recovery built in. I wonder if that might solve the problem and keep me even more toasty.

Thanks for the breath guard link. Like I said I am in a whole new world riding in the cold.

Hopefully the products I ordered will work.

 

[BajaRon]

I'm not sure there is a perfect solution as even the heated shields don't work for the glasses. The breath guards seem to be the best when glasses are involved because they keep the breath air from going up.

This is the cold weather breath guard for the Arai. It is made of soft cloth and blocks off the area below the nose to prevent fogging. Still not a perfect solution but works very well. It's one of those things that gets better as you learn to work with it.

 

[hondaman]

this works for me

 

[NancysToy]

this works for me

I've been looking at these. They remind me of a jet pilot's helmet, I guess.

 

[Dochands]

Sorry to say the the Zooke did nothing much for my visor or glasses under the helmet. I am far sighted mostly so I can ride without my glasses.

Thanks to Nancytoy for mentioning in another post the Fog City insert. I read a review comparing them to the Progrip inserts for fogging.

On my clear shield I tried a Progrip last summerand was disappointed with it. I replaced it with the quality mirror shield from Shoei. But it works like a charm against the fogging.

So as usual my quest is a dead heat on a merry go round. I had the solution all the time and did not realize it. I still prefer my mirrored visor but no fogging is great.

So no glasses or contacts, clear visor with Progrip and I am, finally, good to go in the cold.

Thanks all for your help. Clearly, helmet manufacters need to make helmets fog proof, polychromatic with builtin Bluetooth, HUD, and rear view mirror systems. Instead of one helmet having one thing and one having another. And while we are at it, why not built in noise canceling headphones like my Bose aircraft headset? If it were built into the padding it would certainly fit. Is that too much to ask? LOL

 

[wyliec]

Sorry to say the the Zooke did nothing much for my visor or glasses under the helmet. I am far sighted mostly so I can ride without my glasses.

Thanks to Nancytoy for mentioning in another post the Fog City insert. I read a review comparing them to the Progrip inserts for fogging.

On my clear shield I tried a Progrip last summerand was disappointed with it. I replaced it with the quality mirror shield from Shoei. But it works like a charm against the fogging.

So as usual my quest is a dead heat on a merry go round. I had the solution all the time and did not realize it. I still prefer my mirrored visor but no fogging is great.

So no glasses or contacts, clear visor with Progrip and I am, finally, good to go in the cold.

Thanks all for your help. Clearly, helmet manufacters need to make helmets fog proof, polychromatic with builtin Bluetooth, HUD, and rear view mirror systems. Instead of one helmet having one thing and one having another. And while we are at it, why not built in noise canceling headphones like my Bose aircraft headset? If it were built into the padding it would certainly fit. Is that too much to ask? LOL

I have an arai and was going to get a pinlock set up; but, I looked at the pro grip here:

http://www.compacc.com/p.cfm/c/1205003/p/706

If this is what you are talking about and it prevents fogging, I think I'll give it a try; it's a lot cheaper.

 

[NancysToy]

Sorry to say the the Zooke did nothing much for my visor or glasses under the helmet. I am far sighted mostly so I can ride without my glasses.

Thanks to Nancytoy for mentioning in another post the Fog City insert. I read a review comparing them to the Progrip inserts for fogging.

On my clear shield I tried a Progrip last summerand was disappointed with it. I replaced it with the quality mirror shield from Shoei. But it works like a charm against the fogging.

So as usual my quest is a dead heat on a merry go round. I had the solution all the time and did not realize it. I still prefer my mirrored visor but no fogging is great.

So no glasses or contacts, clear visor with Progrip and I am, finally, good to go in the cold.

Thanks all for your help. Clearly, helmet manufacters need to make helmets fog proof, polychromatic with builtin Bluetooth, HUD, and rear view mirror systems. Instead of one helmet having one thing and one having another. And while we are at it, why not built in noise canceling headphones like my Bose aircraft headset? If it were built into the padding it would certainly fit. Is that too much to ask? LOL

I gave the Zooke a good test Saturday. Didn't completely work for me, either...disappointingly. It was the worst when I first put on my glasses, and I was all heated up from getting my gear on. I did notice that it made the glasses clear much more quickly, though. I only had to stop breathing or breath slowly for a few seconds and they would clear, whereas before it could take minutes if I wasn't moving or came inside. On the road, it actually performed reasonably well, especially if I cracked open the faceshield when I stopped. It was an improvement, but not perfect. It was worth using, since I did not have to abandon my glasses altogether, but I'd like something better. I'm gonna order some Clarity Defog-It from Amazon, and try that next. Too hard to see the fine print on the RT-S display without my glasses.

 

[Dochands]

NancyT let me know if it works for you. Perhaps the Progrip will help that too.

Wyliec do a search on google for the Fog insert and you'll find a review comparison of both products. The Progrip is polychromatic and is sold primarily for that purpose even though I found it did very little for sun.

 

[wyliec]

NancyT let me know if it works for you. Perhaps the Progrip will help that too.

Wyliec do a search on google for the Fog insert and you'll find a review comparison of both products. The Progrip is polychromatic and is sold primarily for that purpose even though I found it did very little for sun.

http://www.webbikeworld.com/motorcycle-helmets/visors/fog-city-progrip.htm
I read the reviews. I think I'll pay the price for a pinlock.

 

[bone crusher]

Come on guys...all seasoned riders know what the best approach is...don't breathe when you are riding...problem solved...the thrill of the Spyder should keep you going long enough!

 

[jlb]

And while we are at it, why not built in noise canceling headphones like my Bose aircraft headset?

Sorry to go off subject, but you have a Bose headset? I am so jealous, love my LightSpeeds but Bose.....

Ok, back to the original subject.

 

[jsmiley]

I commute daily in this cold stuff. I have used a couple different products before buying a fogbox for my helmet at $12. Just checking the seal around my nose on the fog box before riding, keeping my mouth vents open, and on rare occasions cracking the visor keeps my visor nice and clear. The coldest so far was -2 degrees with wind chill. :thumbup:

Only bad part is it can be a pain to take my helmet off as the fit is so snug.