• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Where/how do you run the USB Power Cord for phone?

Dasmoetorhead

Active member
My F3S has the USB port inside the frunk. How are you running the cord from the handlebar to inside the frunk?
 
Last edited by a moderator:
I ran a 14 gage fused wire directly off the battery up and out under the seat with an SAE connector on the end. Then I can split off to USB or any other 12v connector I wish. I charge my phone, GPS, Sena, and 2 heated jackets off that line. Simple easy and very cost effective, and easy to install. When not in use, leave rolled up under the seat. Also, I use it to connect to a battery tender during the winter.
 
I parasited the power for my dual usb in the blank switch spot off the driver seat heater switch. 2020 RTL
 
Plugged it in the customer convenience outlet under the left inspection panel, and ran it into the tank bag. Got a plug on it that allows removing the tank bag.
 
I also eliminated the useless analog dash gages and installed the cigarette type receptacle on one side and a dual USB with and volt meter on the other side. I also installed another double USB/volt meter in the empty switch spot right below the steering head. So, I've got 12v power coming out everywhere. Frunk, trunk saddle bags under the seat, and to my trailer when I pull it.
 
Back
Top