What do you use for Cleaning and Protecting the matte bits?

[wmh9680]

Good afternoon, what does everyone with the gray matte finish use to keep it looking good. I got some Flitz Flat/Matte Finish Cleaner when I got the bike and I'm running out. Also what to use on the black flat plastic trim.
Thanks, Mike

 

[Peter Aawen]

Check this recent thread out :thumbup:

https://www.spyderlovers.com/forums...Spyder-how-do-you-care-for-it&highlight=Matte

 

[canamjhb]

Microfiber cloth and water. I used a spray bottle for the water and rolled around the bike on a wheeled mechanics stool. Easy and inexpensive. I believe there is a warning under the frunk lid telling you not to use waxes or cleaners on your matte finish..... Jim

 

[msgoodwrench]

I used Maguiars Ultimate Black Plastic Restorer on my 2008 GS. It did a great job on certain parts - the back rest, the mud flaps...but didn't do so well on some of the other black matte finish plastic - the dash, the passenger grip bars. It seems that not all the black matte finish parts are the same plastic make-up. Has anyone else found this? What do you all use on these other areas, like the dash, grip bars, plastic covers over the steering arms? Thank you for your input!

 

[Excoastie]

Back in my Jeep days, I used 303 Protectant for the fenders, hardtop, and any other plastic that was on the outside.
It's a staple for the Jeepers that like a clean vehicle after the trail riding is done.

It works well on the Spyder too!

https://www.amazon.com/303-Dust-Lin...9Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

--Exco

 

[johnv50]

Chemical Guys SPI_995_16 Meticulous Matte Detailer and Spray Sealant, 16 oz, Orange, available on Amazon.
This stuff works great on my tri-black 2016 F3L

 

[chipveres]

I use Nu-Finish on the painted white bits and original Armor-All on everything else. Spray a little on a rag and wipe on.

 

[bsavulis]

So the original owner of my RT used spray wax on the matte finish and the black plastic.:banghead: I have washed the trike a number of times but I can still see waxy build up on the frunk lid and a few other areas. Any advice on how to get this off. Also the black plastic is almost always grey because of this wax. I was thinking of getting it clean and then using a Cerrakote ceramic coating to keep it looking nice and clean. I am looking for any hints on how to get the bike looking better and keeping it that way.

Brian

 

[chipveres]

Well, ammonia is known to cut floor wax. Try a little spot to see how it comes out. We use Mother's Back to Black on the matte black and original Armor All on the shiny black.

 

[Deanna777]

So the original owner of my RT used spray wax on the matte finish and the black plastic.:banghead: I have washed the trike a number of times but I can still see waxy build up on the frunk lid and a few other areas. Any advice on how to get this off. Also the black plastic is almost always grey because of this wax. I was thinking of getting it clean and then using a Cerrakote ceramic coating to keep it looking nice and clean. I am looking for any hints on how to get the bike looking better and keeping it that way.

Brian

Brain,

I use Chemical Guys Auto Wash for Satin-Matte finish (I have a 2023 F3 LTD Special that has a matte finish), Waterless Carwash (to wash the bike after I have gone on a ride), and Black Diamond Matte Magic Detailer from Lamonster Garage. Also, I use Chemical Guys Jet Seal Matte - Sealer + protectant which provides up to 12 months of protection.

Sorry I couldn't help you on how to get rid of the spray wax on from the original owner. Good luck!

Deanna

 

[al0vely]

So the original owner of my RT used spray wax on the matte finish and the black plastic.:banghead: I have washed the trike a number of times but I can still see waxy build up on the frunk lid and a few other areas. Any advice on how to get this off. Also the black plastic is almost always grey because of this wax. I was thinking of getting it clean and then using a Cerrakote ceramic coating to keep it looking nice and clean. I am looking for any hints on how to get the bike looking better and keeping it that way.

Brian

Curious …What color 2014 had the matte finish?

 

[bsavulis]

Curious …What color 2014 had the matte finish?

It is a silver / grey color. I am not sure of the official BRP name.

 

[redrazor]

So the original owner of my RT used spray wax on the matte finish and the black plastic.:banghead: I have washed the trike a number of times but I can still see waxy build up on the frunk lid and a few other areas. Any advice on how to get this off. Also the black plastic is almost always grey because of this wax. I was thinking of getting it clean and then using a Cerrakote ceramic coating to keep it looking nice and clean. I am looking for any hints on how to get the bike looking better and keeping it that way.

Brian

:2thumbs: I really like Adam's Polishes " Matte Detailer" Amazon has it for $22. My 2014 RTL is also matt grey and black. Works great !:clap:

 

[rdersch]

I recently purchased a second Spyder F3-S with a black matte paint finish. I regularly detail my Porsche cars, and current Spyder with a multitude of cleaning and detailing products.
That said, I am look for the best products to clean and detail my new Spyder which has matte paint.
What are any other members utilizing to clean and detail their matte finish rides?

 

[racoon]

After some time with Google, I ended up ordering some Meticulous Matte products from the Chemical Guys website.
One bottle is an auto wash product and the other is a detailer and sealant, both of which are specifically designed for matte finish paints.

I would avoid any power polisher or buffer tools, and do everything by hand so as not to ruin the finish.

The caveat is that I haven't had my Spyder long enough for it to need washing, so I haven't used either product yet.

 

[canamjhb]

Curious …What color 2014 had the matte finish?

It is a silver / grey color. I am not sure of the official BRP name.

Platinum Silver Satin

 

[Deanna777]

After some time with Google, I ended up ordering some Meticulous Matte products from the Chemical Guys website.
One bottle is an auto wash product and the other is a detailer and sealant, both of which are specifically designed for matte finish paints.

I would avoid any power polisher or buffer tools, and do everything by hand so as not to ruin the finish.

The caveat is that I haven't had my Spyder long enough for it to need washing, so I haven't used either product yet.

HI racoon,

I use the following products from Chemical Guys: Meticulous Matte for Satin-Matte finish. This is a superior surface cleaner PH balanced-streak free formula Safe for OEM, Vinyl, and matte painted surfaces. I also use the Jet Seal matte Sealant and Paint Protectant. ( this is also from Chemical Guys.

I use the Jet Seal Matte once a year. That has a up to 12 months of protection Sharp luster finish, Advanced UV protection.
I use the above on my 2023 LTD Special Series which has a matte finish.


Deanna

 

[Dasmoetorhead]

I use the BRP Can am stuff . It works good on the black Matt finish and it's $13.00. Just bought my 2nd bottle. I also use Meguiers detail on the rest of the bike.