Is it possible the heim joints on the bar ends are seized?
Not only NO, But HELL NO!!
Seems like a big lack of information from the OP for some reason, Let's get all of the informtion first.
T.P.
I am not the least bit mechanically inclined, so my plural reference can be attributed to my ignorance. Thank you for the correction.
I would love to help you resolve this issue, if possible. Can you tell me if you got the Original or the Ultra bar? Sway bar kits were installed by SpyderPops, Lamonster and my tech (Daniel) using Lamonster's lift. Do you know which of these installed your bar kit?
Is it possible the heim joints on the bar ends are seized?
Not only NO, But HELL NO!!
Seems like a big lack of information from the OP for some reason, Let's get all of the informtion first.
T.P.
Now ya know! ;-)
Thank you everyone for providing me with suggestions. A special thanks to BahaRon and Harvey from SpyderOps. It’s nice to know there are still people and businesses who are committed to excellent customer service. I took the bike to Lamont of Lamonster Garage, another example of superb customer service. I wish I had known about them when I first purchased the bike. Lamont rode the bike and said it rode like a tire was out of balance. My bike has 20,000 miles and the front tires are cupping. As Harvey explained it to me, the sway bar increases the contact of the tires. Basically my little shake I had always noticed became more prominent with the sway bar. Today I’m getting all new tires and an alignment. If you’ll indulge me, I have one more question. For any of you who have the stage 2 Elka front and rear shocks, is there a notable difference in the comfort level of your ride vs stock shocks?
Thank you everyone for providing me with suggestions. A special thanks to BahaRon and Harvey from SpyderOps. It’s nice to know there are still people and businesses who are committed to excellent customer service. I took the bike to Lamont of Lamonster Garage, another example of superb customer service. I wish I had known about them when I first purchased the bike. Lamont rode the bike and said it rode like a tire was out of balance. My bike has 20,000 miles and the front tires are cupping. As Harvey explained it to me, the sway bar increases the contact of the tires. Basically my little shake I had always noticed became more prominent with the sway bar. Today I’m getting all new tires and an alignment. If you’ll indulge me, I have one more question. For any of you who have the stage 2 Elka front and rear shocks, is there a notable difference in the comfort level of your ride vs stock shocks?
As far as the stage two shocks, they have all of the adjustment on them to make the bike ride any way you want it to act!! I put them on to get rid of the body roll, it feels a lot more planted in the corners than it ever did with the stock shocks, and I have the options to soften the ride as much as I want, versus the crappy klick up and down! I put a Sway bar on first, that made a big difference, year later, shocks, another change for the good, now next season I will drink the Kool aide that Mike is serving and put some car tires on for the cherry on the top, and go hit some twisties in Tenn!!!:yikes: P.S, I know Mike you're going to tell me I did it @#$ backwards, but I know what I like as far as handling and I am getting it dialed in to my comfort!
If you still have OEM Kenda tires on your Spyder .... be advised Kenda has the Highest DEFECTIVE Tire ratio of ANY tire I have ever heard of. ..... You state the Spyder has " stage 2 Elka shocks front and rear " ....WHY ???? .... Folks usually buy them to STIFFEN their suspension. .... this will decrease the comfort level .... it's a tradeoff some folks accept ... Cadillac's have a comfortable ride - Race cars don't..... it's that simple ...... JMHO .... Mike :thumbup:
Going out on a limb here. Check to see that the installer correctly tightened down the bolts that hold the sway bar in the frame channel. Being installed at a rally sometimes leads to being rushed and that's how mistakes are made. If those bolts were accidentally left loose the bike would ride almost as if it didn't have a sway bar.