Make your own accessories!

[leenanj]

My final design of my reverse gear select!

Posted this on Thingiverse for those who want to print there own.

http://www.thingiverse.com/thing:3760108

If you do lets see some pictures.

------------

Larger handle for the reverse gear select lever.

Will fit all models of the Can Am Ryker.

This will make it much easier to change gears either
using you foot or your hand.

I also lifted the gear lever off the spine and rotated it back further,
This is completely optional on your part.

I also added a washer in front of the handle so it would not
slide over the raised portion of the shaft, again optional.

 

[leenanj]

Another useful 3D item to print for your Ryker, all models.

A helmet holder for the handlebars!

Print one or two for both sides, makes it convenient to hang your helmet on.



https://www.thingiverse.com/thing:3781823

 

[CoolPickle]

3D printing

Hi, new member here.

I recently purchased a crashed 2012 spyder RSS in hopes of rebuilding it not realizing how difficult it would be since the bike is not that old, but the majority of parts are already unavailable.
Anyhow, since I am into 3D printing, I designed and printed the gear shift lever and replaced the original. Now looking into possibly printing out "RH Front Panel" in black since I can't find one anywhere.

 

[pegasus1300]

CoolPickle, is your RSS an SE5 or an SM5?

 

[CopperSpyder]

Hi, new member here.

I recently purchased a crashed 2012 spyder RSS in hopes of rebuilding it not realizing how difficult it would be since the bike is not that old, but the majority of parts are already unavailable.
Anyhow, since I am into 3D printing, I designed and printed the gear shift lever and replaced the original. Now looking into possibly printing out "RH Front Panel" in black since I can't find one anywhere.

You might try searching for used parts online here is an example of one place "click:https://www.boonstraparts.com/en/parts/mke=can+am/mdl=spyder+rs+990+se5+2010/prt=tail-fairing-left?fbclid=IwAR0XpKBoSr2CGirgKIGQqQt3AY6AgTZQIaAcBkbghI0mIJPwsaCoFYZHwwU

But 3D printing is a great way togo if it can be done. :thumbup:

 

[Isopedella]

I made a longer bar.

.