Hi folks
Got a 2019 Rally delivered to me this morning, from a private sale, but I can't for the life of me get it to fire up!
I've read and re-read the operating manual section but no joy.
I have tried both RF keys and have also fully charged the battery.
So, I'm in Forward gear with the handbrake on and the RF key attached. I press the starter to wake up the bike and then flick the red Engine Run switch to on, and hear what I presume is the fuel pump priming. I twist the throttle gently and back again and can hear a further whine. With my foot on the brake pedal I press the starter button once more and release it but get nothing - no additional noises or clicking. When the Ryker is woken up I get the message displayed to read the safety card before operating. I have obviously read the safety notice inside the panel before the starting procedure. My engine light is illuminated orange in outline during this time. I have a full tank of fuel.
I've tried it with the parking brake off and I am pressing the starter button promptly after twisting the throttle and having my foot on the brake. I've tried varying lengths of time pressing the starter button down.
Any ideas as to what I'm doing wrong?
Thanks for any suggestions.
Got a 2019 Rally delivered to me this morning, from a private sale, but I can't for the life of me get it to fire up!
I've read and re-read the operating manual section but no joy.
I have tried both RF keys and have also fully charged the battery.
So, I'm in Forward gear with the handbrake on and the RF key attached. I press the starter to wake up the bike and then flick the red Engine Run switch to on, and hear what I presume is the fuel pump priming. I twist the throttle gently and back again and can hear a further whine. With my foot on the brake pedal I press the starter button once more and release it but get nothing - no additional noises or clicking. When the Ryker is woken up I get the message displayed to read the safety card before operating. I have obviously read the safety notice inside the panel before the starting procedure. My engine light is illuminated orange in outline during this time. I have a full tank of fuel.
I've tried it with the parking brake off and I am pressing the starter button promptly after twisting the throttle and having my foot on the brake. I've tried varying lengths of time pressing the starter button down.
Any ideas as to what I'm doing wrong?
Thanks for any suggestions.