electricman
New member
i have a 2011 can am spyder rt with check engine light comeing on , found out how to get codes from the bike thay are p2279 and po 106 can any one help me please THANKS Brian
Last edited by a moderator:
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Help with Can Am codes P2279 /// P0106 ??
- Thread starter electricman
- Start date
electricman
New member
Thanks it only runs for about 2 mins cuts off long enough to get the codes should it be doing that.
billybovine
Active member
P0106 Manifold absolute pressure circuit range/performance
Possible causes
Damaged sensor, damaged circuit wires, damaged connector or damaged ECM pins, ECM voltage supply.
P2279 Intake air system leak.
Possible causes
Check for cracked plenum. intake stub leak, between throttle body and cylinder intake.
So first look at the MAP sensors. Have the map sensor hoses ever been changed? If not. That the first thing to do. Replace them. Does not matter if you think they look good. If that does not fix it. Start looking for leaks.
Possible causes
Damaged sensor, damaged circuit wires, damaged connector or damaged ECM pins, ECM voltage supply.
P2279 Intake air system leak.
Possible causes
Check for cracked plenum. intake stub leak, between throttle body and cylinder intake.
So first look at the MAP sensors. Have the map sensor hoses ever been changed? If not. That the first thing to do. Replace them. Does not matter if you think they look good. If that does not fix it. Start looking for leaks.
electricman
New member
Thanks for all your help . Got to go to work now don t have a lot of time but i will let you what i see .
M109Dreamer
Active member
I had a similar issue with our 11 RT. Below link shows the pics of ours I took when I replaced our vacuum lines.
https://www.spyderlovers.com/forums/showthread.php?101535-Need-Help&highlight=vacuum+lines
