ricford
New member
I went to Wick-It Performance today and had the ECU flashed to stage 2. Impressive performance. I did a few simple tests and noted the performance was far above the factory eprom settings. The eprom program was written by a Canadian. The procedure took about 3 hours, with one hour removing the covering and drilling a hole in the airbox to allow more air so you could develop 10 HP more. And it shows. One can achieve triple digits very very quickly. Not that I did, just guessing. It was a great ride. With La State taxes, the all in cost was $630. Coleman Haynes is the Flasher and photographer. He sent me some photos of the process. I've attached several. Recently someone asked where the ECU was located. It is behind the left front wheel. That panel you remove with your hands. The rest is just getting to the airbox cover to remove the lid to drill a large hole in it to allow more air. I am pleased with the results. I checked gas mileage on the return trip and pushing it hard most of the way, I got 30 MPG. You must, before the flash, and forever after, use premium fuel. If you want to have them do it, you can remove the eprom and the air box cover lid and send it to them. Call them to get the info you need. I forgot to add. When you turn the key on, you can instantly start the bike, you don't have to wait for the computer to boot up. That screen does come on but just button push it off... and my bad, the last photo in this sequence should have been the third. This is where the ECU eprom resides, behing the panel.
