-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Ryker gas filler cover
- Thread starter Zoot
- Start date
Jsmith8695
Member
No issues yet with my rally.
Rob Rodriguez
New member
I've only filled up twice but no problems with the "door". DO NOT however let any gas get on the plastic. it will discolor it.
Markubis
Member
I only have had to fill mine twice so far so no issues with my door as well. (around 700 miles on it so far)
The first time I filled mine I splashed some gas up and around the tank due to the spring door popping up too fast when I pulled the gas nozzle out. No issues with it discoloring the paint though.
The second time I filled up, I made sure to pull the gas nozzle out slowly to keep the spring trap door from snapping shut.
Rob Rodriguez
New member
Yes, I had the same issue with the spring door and the nozzle dripped a few drops. I was/am pissed about it to say the least but not much I can do. I've owned lots of power sports products over the years and I've spilled a bit of gas on them here and they over the years and never had this happen before.
Markubis
Member
I was going to create a post on the gas filler design so I'm glad this came up. If you take a look at the design of the tank inlet and lid you'll see that not only is there no seal, but if you were to spray water on the bike to wash it I can't see how quite a bit of water won't make it's way right into the fuel filler. When the slider lid is closed it remains about 3/4" above the metal filler. Then there's a gap around the bottom of the lid where any water sprayed from the side would go right in.
I will figure out some sort of way to seal the metal filler neck when washing it, anyone else noticed this or had evidence of water in the fuel after a wash?
I will figure out some sort of way to seal the metal filler neck when washing it, anyone else noticed this or had evidence of water in the fuel after a wash?
vstrommer
New member
I have one of these locking caps and have no issues.
Attachments
Aufgeblassen47
New member
It is just fine if utilized in a proper manner.
Bfromla
Well-known member
Yet another security issue as it may prevent siphoning but vandals could still add unwanted material :banghead:
Meaning don't spray it with a hose to wash it?
OK folks, relax and take a deep breath. Everything is gonna be alright. Mine has been in a torrential down pour for probably over 4hrs straight and not one drop of water got in the gas tank that I am aware of, runs like top and never missed a beat. Mine has also been washed with no issues. My Ford F-150 has a capless fuel filler with over 30,000 miles and never a fuel issue. What are some of you folks gonna do if you get caught in the rain? :yikes: cueman
Aufgeblassen47
New member
The Gates 31819 locking gas cap works great on the Ryker, and is dirt cheap (like $13).
vstrommer
New member
No seal... just plastic
poli
New member
Has anyone actually had an issue with anything getting in the gas filler area or is everyone just worrying ABOUT something happening. When someone first found out that the locking cap would fit I thought it was a good idea. Then I went out and checked my bike. I ride 80% of the time in muddy, dusty, sandy areas. I took a Kleenex and wiped it around down inside the filler area. It came out clean! Did it again only made sure I got all around and on the valve area. Still clean! I admit it looks like there's a bunch of space between the sliding cover but somehow it's doing it's job. So just my opinion, if you feel you need it for security it may be of value, but for keeping stuff out of your gas … you just don't need it. Just another key to keep up with and a hassle when refueling. I repeat -- just my opinion.
Aufgeblassen47
New member
No, but is pretty tight fit. You could probably find an o-ring or flat gasket that would work. But it is already a whole lot better than no cap at all.
Similar threads
