-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Anyone come up with a Ryker Frunk Lock?
- Thread starter KC61
- Start date
Yes, there’s one out there, on backorder,
I saw that and it looks the same as this one on Amazon for $10
https://www.amazon.com/OWACH-Button...love+box+lock&qid=1559786508&s=gateway&sr=8-1
safecracker
Active member
Actually there is a lock already installed on the Ryker Frunk. It does not have a cable attached to it. There is a You Tube video out there that shows it. I believe a guy in Texas posted the video. Bruce
I found the video. But you still need some kind of mechanism to lock it.
Sure does.
bcraig
New member
The one from Amazon doesn't include the $30 paper templates. LOL
bcraig
New member
This is the same one and you can download the instructions from S******** to use as a guide
https://www.amazon.com/OWACH-Button...love+box+lock&qid=1559786508&s=gateway&sr=8-1
KID Ryker
Member
Looks like a better deal. $40. dollars cheaper.
I did mine tonight in about an hour or so. It's not hard. I paid like $15 for 2 of them on Amazon. Same lock as a boat glove box. Here's a link
https://www.amazon.com/X-Haibei-Rep...id=1564191772&s=sporting-goods&sr=1-1-catcorr
https://www.amazon.com/X-Haibei-Rep...id=1564191772&s=sporting-goods&sr=1-1-catcorr
Good find, you have any measurements on where to drill the 1 inch hole?
KID Ryker
Member
Hey Kid, is that the prototype Ryker Rally you got there?
No I went the other way :roflblack:Wifesaidyes
New member
Seems that 1in hole (center) must be drilled at 1.5in from the top edge of the lid
Thank you, I will be installing mine soon.
I see there is a circle in the underside of the plastic lid in about that same place, how does that line up?
Batmobil-F3
New member
here is an installation video for a ryker frunk lock. You can buy the lock at Amazon and use the vidoe to install it.
Similar threads
