Who has Grip Puppies?

[ABN350F]

Anyone with grip puppies? -- could you tell me which size to order to fit over my standard grips?



thanks in advance

 

[Firefly]

Anyone with grip puppies? -- could you tell me which size to order to fit over my standard grips?



thanks in advance

Use the Small---
GPSMALL GRIP PUPPIES ™ Small.
www.casporttouring.com


When you install them-- soak them in hot soapy water-- get your stock grips wet too--- once you get them started on the end it helps to wrap them with a rag or towel and then twist as you 'push/pull' them on.

No need to cut them--- just push them all the way on-- there is room.

NOTE: Be careful on the throttle side! If you twist clockwise (towards throttle-OFF) you can break the plastic nub inside the control that keeps the grip and control set in place on the bar---- ask me how I know:gaah:

 

[vtrider]

I installed the small grip puppies for the 3/4 in bars on my spyder along with the Symtec heated grip elements, using my original grips. I purchased them from California Sport Touring. As Firefly stated, use soapy water to slide the grip puppies onto your grips. It's a bit of a pain at first, but they will slide in place. I used compressed air as well to balloon the grip puppies which will help aid in sliding them over the grips.

 

[Mo Lee]

I installed the small grip puppies for the 3/4 in bars on my spyder along with the Symtec heated grip elements, using my original grips. I purchased them from California Sport Touring. As Firefly stated, use soapy water to slide the grip puppies onto your grips. It's a bit of a pain at first, but they will slide in place. I used compressed air as well to balloon the grip puppies which will help aid in sliding them over the grips.

Now I know why mine are loose at the small end. I bought the large and with a little tugging and pulling installed them dry in the parking lot of the dealer.

 

[BumbleBee]

Now I know why mine are loose at the small end. I bought the large and with a little tugging and pulling installed them dry in the parking lot of the dealer.

:roflblack::roflblack::roflblack::roflblack::roflblack::roflblack::roflblack::roflblack::roflblack: "Re-Due them"!!!

 

[aubierules]

i had them...didint like them...made the grips too big for me....threw them away and got all foam grips...work much better for me

 

[3wheeldemon]

:shemademe_smilie:

 

[Mo Lee]

:roflblack::roflblack::roflblack::roflblack::roflblack::roflblack::roflblack::roflblack::roflblack: "Re-Due them"!!![/QUOTE]

Maybe they will shrink.

 

[hawkiii]

I use them, like them. Get the small for 7/8" handlebars.

 

[mjw930]

I use them on my Goldwing, I love them.