-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Ryker floorboards
- Thread starter Lamonster
- Start date
Michaelscs
Member
They do look good! The question I have is do you still have the tool-less adjustability of board forward and back, and also brake pedal height?
In the pictures it looks like the pedal and board will interfere with each other, not allowing adjustment.
In the pictures it looks like the pedal and board will interfere with each other, not allowing adjustment.
Lamonster
SpyderLovers Founder
Yes are are still adjustable and the brake peddle is adjustable from the factory. Just pull out and rotate it where you need it.
Last edited:
Jarred
New member
Glad to see you’ve been busy Lamont. I’m wondering if u can make a cheaper/better windshield, hand protectors, splash guards and those “A Arm protectors”. But I still think an upgraded seat & passenger seat will be a home run. That seems to be the most expensive add on from BRP. Keep up the good work, I can’t wait to own a Rally, gonna Buy one right after I buy an enclosed trailer, no extra room in my garage. :gaah:
WilliamTRyker
New member
Newb poster here. Thanks for posting that. I noticed in the Operators Guide on p.27, they show a picture of the brake being able to be pull out (away from the bike) but the accompanying text doesn't really mention what your supposed to do. :2thumbs:
Hey Lamonster, are the floor boards rubber coated? Thanks, cueman
Lamonster
SpyderLovers Founder
No, they are powder coated. These are the smaller boards we use on the F3.
Michaelscs
Member
I'm familiar with how the adjustment works with the stock pegs. My question was, with your boards, it doesn't look like you can lift board high enough because it looks like it will hit the brake pedal, not allowing it to be loose enough to move. Also, it looks like you can't pull the brake pedal out far enough to rotate because it will hit the board. These questions are based on how it looks in your pictures.
Lamonster
SpyderLovers Founder
I'll have these in hand tomorrow. You may have to adjust the brake after you put the board where you want it. Either way it can be done, just may take an extra step.
Michaelscs
Member
Triumphcycleman
New member
That is going to be a big seller. The stock pegs are a bit short(?) and their end digs into your shoe if you aren't wearing boots. Is the board angle adjustable?
Jsmith8695
Member
Those are what I am looking for. When will they be available? Will you also have an installation video?
---- Jim
---- Jim
blacklightning
Well-known member
Those look nice. That would be a must have item if I had a ryker. The current pegs are the worse things that I have seen on a 2 or 3 wheeler, ever! You will sell a lot of those. Keep up the good work. Continue to get better and be blessed.
KID Ryker
Member
Any side view of Ryker floorboards pic. down level with bike to see angle of board
Bob Denman
New member
Michaelscs
Member
Lamont, thanks for your latest update and pictures. These pictures reaffirm my question. How can you take advantage of the adjustment of the board fore and aft, and rotation of the brake pedal for height? Do you need to remove the board temporarily, flip up the clamp and adjust the mount fore and aft and/or adjust your brake pedal height, and then remount your board?
Similar threads
