New BRP Sport Rear Fender - Installed

[MotoSpyder2]

I installed the new BRP Sport Rear Fender yesterday.

The installation was pretty easy, instructions were terrible IMHO. The box included the fender, Right cover to shield the Disk brake, Left cover to cover the belt, and a small bag that included screws along with Licence Plate light extension. I left the lower belt cover on and it fit pretty well. I did trim a small 1"x1" piece from it and needed longer Screws to go through the 2 shields to the speed nuts.

I know there are others who already installed but I thought some more pics might be helpful.....It really looks better in-person.






Also, the licence plate bracket has side and rear reflectors that I've left off for now. I'll try to find some red reflectors and stick on more discretely. The Bracket is universal and is larger than my Alberta motorcycle plate.

Not everyone will like this look but the included side shields make it look cleaned up.

Enjoy the Spring.

 

[Bob Denman]

I was just looking in BRP's catalog last evening, and I wondered how that would look... GREAT!! :2thumbs:

 

[Sarge707]

:clap:Looks Nice!!

But BRP is Not getting $300 from me for it, The panel under the seat is still going to get messy if go through some puddles but at least your passengers back won,t get wet.
I still like the Naked version!:yes:

 

[Flanker]

Nice job; looks good! :thumbup:

 

[daltmeyer]

Alright! Got rid of that lobster tail. Somehow the brp tail tidy still looks weird.

I did the ninja fender mod and added my mudflap mod to that mod.

 

[DrewNJ]

Alright! Got rid of that lobster tail. Somehow the brp tail tidy still looks weird.

I did the ninja fender mod and added my mudflap mod to that mod.

I agree, maybe it grows on you? It looks like a dirt bike fender.

Sent from my Venue 8 3830 using Tapatalk

 

[Bob Denman]

I agree, maybe it grows on you? It looks like a dirt bike fender.

Just what you need, for an adventure in the Pine Barrens... :thumbup:

 

[wyliec]

I agree, maybe it grows on you? It looks like a dirt bike fender.

Sent from my Venue 8 3830 using Tapatalk

I'll third that.

 

[midnight]

So can you just purchase the belt & brake guard separate from the number plate bracket?
Or do they only sell it as a complete kit?

 

[Flanker]

So can you just purchase the belt & brake guard separate from the number plate bracket?
Or do they only sell it as a complete kit?

Yea! What he asked. TY!

 

[BonesDT]

Nice! It definitely looks much better than the stock fender.

I find it interesting that when purchasing a new Spyder, the sport fender is a $299 option, while buying it separately is $299. I'm assuming when you purchase a new Spyder with the option, they don't give you the stock fender to sell on eBay.

 

[Sarge707]

Nice! It definitely looks much better than the stock fender.

I find it interesting that when purchasing a new Spyder, the sport fender is a $299 option, while buying it separately is $299. I'm assuming when you purchase a new Spyder with the option, they don't give you the stock fender to sell on eBay.

I would go with the Stock fender on initial purchase -But after about 20,000 Miles you Will Need a replacement OR New stock parts?nojoke

 

[phillip@pitbull]

Thanks for posting up pictures. Looks good!

 

[CANUCK SPYDER]

I installed the new BRP Sport Rear Fender yesterday.

The installation was pretty easy, instructions were terrible IMHO. The box included the fender, Right cover to shield the Disk brake, Left cover to cover the belt, and a small bag that included screws along with Licence Plate light extension. I left the lower belt cover on and it fit pretty well. I did trim a small 1"x1" piece from it and needed longer Screws to go through the 2 shields to the speed nuts.

I know there are others who already installed but I thought some more pics might be helpful.....It really looks better in-person.

View attachment 84917

View attachment 84918


Also, the licence plate bracket has side and rear reflectors that I've left off for now. I'll try to find some red reflectors and stick on more discretely. The Bracket is universal and is larger than my Alberta motorcycle plate.

Not everyone will like this look but the included side shields make it look cleaned up.

Enjoy the Spring.

I see this post is 4 years old but I need to do the same thing to my Spyder and also noticed you are from Edmonton, did you just get it from Martin Equip?

 

[Vader]

I see this post is 4 years old but I need to do the same thing to my Spyder and also noticed you are from Edmonton, did you just get it from Martin Equip?

Here is the link to my instal. Hope it helps.
http://www.spyderlovers.com/forums/showthread.php?114081-Rear-fender-support-failure

You can find it on Amazon for $260..
[FONT=&quot][h=1]Can Am Spyder RS, ST 2014 and prior Sport Rear Fender Black #219400400 by Can-Am[/h]
[/FONT]
[FONT=&quot][/FONT][FONT=&quot][/FONT]
[FONT=&quot][/FONT]
[FONT=&quot][/FONT]

 

[CANUCK SPYDER]

Here is the link to my instal. Hope it helps.
http://www.spyderlovers.com/forums/showthread.php?114081-Rear-fender-support-failure

You can find it on Amazon for $260..
Can Am Spyder RS, ST 2014 and prior Sport Rear Fender Black #219400400 by Can-Am

Thanks Not sure why I thought you were from Edmonton, must have got my wires crossed somewhere searching

 

[Vader]

I'm not...

Thanks Not sure why I thought you were from Edmonton, must have got my wires crossed somewhere searching

But the member who started the thread, MotoSpyder2, is!