• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

What is the best way to by-pass the frunk lock?

wmh9680

wmh9680

New member
After getting locked out this weekend I want to stop using the key for frunk access and seat access. I have attached 2 pics of the frunk lock. The cable pulls from the right to trip the lock open. What is the best/easyest way to run a cable and where to? Seen and heard diff ways. Just wanna make it as simple as possible. Thanks, Mike
 

Attachments

  • spyder frunk lock.jpg
    spyder frunk lock.jpg
    55.6 KB · Views: 347
  • spyder frunk lock 2.jpg
    spyder frunk lock 2.jpg
    48.5 KB · Views: 282
Little checking.....

Go to gallery and latest album's and you will find one "alternative frunk release" I posted may help...:thumbup:
 
Bi-Pass

wmh9680 said:
After getting locked out this weekend I want to stop using the key for frunk access and seat access. I have attached 2 pics of the frunk lock. The cable pulls from the right to trip the lock open. What is the best/easyest way to run a cable and where to? Seen and heard diff ways. Just wanna make it as simple as possible. Thanks, Mike
Click to expand...
I find this Thread of yours interesting - Gene answered this issue for you on His Thread on the 25th .....which you saw because YOU also POSTED on that Thread ..........Sooooo my question is - How many times do you need the Answer ......... Mike :thumbup:
 
I RAN MINE OUT THE L[DRIVERS] side and bent a hefty "L" in it and hid it in the back of the wheelhouse. lotsa pics out there. ride out and look at mine youre not that far away.

not pretty but fast and functional. by the way ,i kinda followed mikes advice
2 years ago!
 
Last edited:
wmh9680 said:
After getting locked out this weekend I want to stop using the key for frunk access and seat access. I have attached 2 pics of the frunk lock. The cable pulls from the right to trip the lock open. What is the best/easyest way to run a cable and where to? Seen and heard diff ways. Just wanna make it as simple as possible. Thanks, Mike
Click to expand...

I removed the 2 panels at the top inside the frunk and saw where the original cable attaches and there is a small hole above where the stock one attaches that I attached a snap swivel and ran a coat hanger out to the lift side wheel. It was simple and works. I could not get the snap swivel to close so I need a slightly larger one that I will pick up tomorrow and use something better that a coat hanger. If I could get to where the stock cable attaches to the ignition switch and run it out the side that would be easy or I thought I had a choke cable in the garage (I don't) that would work too. I agree with whomever said nothing should be attached to the ignition as it is asking for trouble.
Mike
 
wmh9680 said:
I removed the 2 panels at the top inside the frunk and saw where the original cable attaches and there is a small hole above where the stock one attaches that I attached a snap swivel and ran a coat hanger out to the lift side wheel. It was simple and works. . I agree with whomever said nothing should be attached to the ignition as it is asking for trouble.
Mike
Click to expand...

Did mine in similar fashion yesterday. What made it real easy was the pre-drilled hole above the stock lever attachment. Ran a coated wire down to the left inspection panel, attached a key ring, and DONE !! Probably 15 minutes.
I had the seat release done another 15 minutes later. Fishing line attached then led the free end into the glove box on a key ring (thanks to another member's idea :thumbup:), can't even see the line when the seat is down.

I also coated both locks with a silicone spray as a preventive measure.

BIG, BIG thanks to all who posted ideas and pics previously, they all helped my work be so much easier.
 
Last edited:
It is to obvious

That is out in the open and an invitation for someone to pull on it. Just saying!!!!:yikes:
 
BLUEKNIGHT911 said:
I find this Thread of yours interesting - Gene answered this issue for you on His Thread on the 25th .....which you saw because YOU also POSTED on that Thread ..........Sooooo my question is - How many times do you need the Answer ......... Mike :thumbup:
Click to expand...
sometimes I'm looking at so many diff posts I forget where I saw something, sorry, Mike
 
how big of a job to run the cable to the glove box, maybe even using the original stock cable, Thanks, Mike
 
wmh9680 said:
How do you remove the center panel right above the lever in the top pic, I have removed both side panels, Thanks, Mike
Click to expand...
The long side panels have to be loosened at the front so that the screw holding that center panel can be removed (it's hidden). Then there are two screws underneath the center panel and then the obvious ones at the mirror. Hope that helps.
 
UtahPete said:
The long side panels have to be loosened at the front so that the screw holding that center panel can be removed (it's hidden). Then there are two screws underneath the center panel and then the obvious ones at the mirror. Hope that helps.
Click to expand...

Thanks, Mike
 
Hide the device!!!!!!!!!!!!!!!

HayRog said:
The mods I made are not out in the open, I wouldn't think of doing them in that fashion. They're completely out of sight.
Click to expand...

HayRog is correct!!
It is best to conceal the device to open the frunk and/or even the seat if you do it also. Also by using a solid wire and having it rub against the Spyder body like
shown in the 3[SUP]rd[/SUP] picture is an invitation for scratching of the body. But do as you wish!
 
Sooooo the other day while I was in the garage putting my BRP headset from an old helmet into a new helmet, I got to thinking "what-if" my frunk won't open or my seat either, someday?? I've been reading these threads and decided, even though I have had no issues with either, I made a cable-pull out of steel fishing leader with a swivel connected to the latch and a loop on the other end, that is just long enough so you can lift the back edge of the frunk lid to get a finger into the loop and pull and whala! it unlatches. For the seat, I used some safety-wire and twisted a key ring at one end and twisted it about 5" long, drilled a hole thru the plastic pan by the dipstick, ran the twisted wire thru that and secured it around the cable/spring mechanism and of coarse, you pull the front Rt. edge of the seat, grab the key ring and whala! it unlatches. Thanks for all the ideas, gang!!, My wife said that, I'm the only person she knows of, that worries about a problem that isn't a problem yet!! She walked off shaking her head muttering something:dontknow:. Mac:roflblack::roflblack:
 
BLUEKNIGHT911 said:
Pete - from these pics ...... it looks like - to get to the end of the wire so you can pull it .....the Frunk must already be open ....... if the Frunk is open why have this to open the Frunk .... ???? ...... if I'm missing something please explain ...............Thanks ....... Mike :thumbup:
Click to expand...

Sure. I was wondering about that, too, until Lew (Kaos) showed me his installation when I met up with him in central Utah last week. He showed me there's enough flex in that corner of the frunk lid to lift it up enough to reach the pull cord (he used cord). That's the part of this mod that had held me back for so long from doing it.

Some people (e.g. Chupaca) run it out to a place underneath the side panel but I couldn't see that would work on my RT (he has an RSS), so when Lew showed me how easy it is to access it under the corner of the frunk lid, that spurred me on. Well, that and the fact my wife's RT ignition switch broke and we couldn't open her seat or frunk...!

So, in response to the critics who assume for some reason I left the bitter end of the pull wire in plain sight...I didn't.
 
You must log in or register to reply here.

Similar threads

ROB K
Letting go of my 2014 RTL - what is the best way to sell?
Replies
4
Views
1K
Peter Aawen
Peter Aawen
C
Ryker Frunk Lock Won't Open - any ideas?
Replies
6
Views
3K
cjctucson
C
kdunaway
How do I go about getting new keys for my 2014 Spyder RT? Is there any way to get into a locked rear trunk?
Replies
7
Views
421
kdunaway
kdunaway
TheMariner
What's the best way to set the steering lock? Am I doing it wrong?
Replies
6
Views
1K
Peter Aawen
Peter Aawen
Wmoater
Need to replace my frunk cable! What are the steps to replacing?
Replies
5
Views
748
EdMat
EdMat
Back
Top