Lamontster’s Sway Bar

[fastfraser]

Great day to work outside today even with the snow on the ground. Installed Lamontster’s sway bar ,Spyder Pops lighted bump skid and BRP’s signature light . Got to love the Pit Bull lift as I couldn’t have swapped the sway bars out without it as it will lift the F3 or RT more then the 21” required to change sway bars .sorry I don’t understand why they load sideways? :dontknow:​

 

[trikermutha]

You got a picture of the adapter they use on there lifts for the Spyder?

 

[fastfraser]

You got a picture of the adapter they use on there lifts for the Spyder?

Straight lift no adapter unlike the Big Blue Lift .

 

[JS3535]

Great day to work outside today even with the snow on the ground. Installed Lamontster’s sway bar ,Spyder Pops lighted bump skid and BRP’s signature light . Got to love the Pit Bull lift as I couldn’t have swapped the sway bars out without it as it will lift the F3 or RT more then the 21” required to change sway bars .View attachment 157899View attachment 157900sorry I don’t understand why they load sideways? :dontknow:​

If you can’t lift it up, dig a hole. I took my trenching shovel & dug a 6”x2’x18” or so deep hole, rolled my Spyder over it, swung the old sway bar right out & in with the new. I feel it’s a lot safer if you don’t have a lift & trying to get it way up in the air with only a floor jack.

 

[trikermutha]

Straight lift no adapter unlike the Big Blue Lift .

That's the way I use it too but I know they have an adapter to for the Spyder and was wondering what it looked like..Well I tried. :roflblack:

 

[fastfraser]

That's the way I use it too but I know they have an adapter to for the Spyder and was wondering what it looked like..Well I tried. :roflblack:

Look at Big Blue lifts they have the adaptor ,doesn't work for F3s plus you have to take the floor board off to make it work on the RT

 

[Chupaca]

Congrats....

It is nice to have a lift for those jobs though we have had some ingenious methods used. Hope you can get out and test the bar...ray:

 

[trikermutha]

Look at Big Blue lifts they have the adaptor ,doesn't work for F3s plus you have to take the floor board off to make it work on the RT

I think pitbull does too have an adapter?

 

[akbash]

I also have the Pitbull jack they don’t have an adapter don’t need it very sturdy jack. J&S jacks makes one but not for the F3. Don’t let that video for comparison fool you these pit bull jacks are big and built like a tank very sturdy. They made a bunch of changes since that old video. I see Lamonster Also uses Pitbull seen it in a picture on site and in his video when he is stripping parts off his new F3 limited for paint.