Replace brake pads

[bcer960]

I just did friends and used an adjustable grinder wrench, it opened big enough and worked great.

 

[Itadsup]

NEVER ADD FLUID TO BRAKES!!!

I too was getting the "Brake Failure" message with 15,000 miles. Checked brake fluid and one reservoir was a little low. Topped it off and all is well. That was 3 weeks ago. I doubt you need new pads, check the fluid levels first.

Mike

Never add fluid to your reservoir as the pads ware down the fluid goes down.. Put new pads on the fluid goes up!!
Only add fluid when you flush the system and put new fluid in...

 

[Peteoz]

Never add fluid to your reservoir as the pads ware down the fluid goes down.. Put new pads on the fluid goes up!!
Only add fluid when you flush the system and put new fluid in...

I’m no brake expert, Itadsup, and this has not happened to me, but there are a number of threads on this where nanny kicks up a brake warning if the fluid level drops a little. Adding a spoonful of fluid clears the warning. That’s why you’ll find the advice to add a little fluid.

Pete

 

[bobnaquin]

I took my Spyder in yesterday because I am getting a "Brake failure warning". The dealer called me today and said I need new brake pads and that is the cause of the warning. I only have 9,300 miles on it and don't even use the brakes in most cases. I have the feeling they are just trying to sell something rather than figure out the real problem.

They also told me that most pads only last 8,000-11,000 miles. Anyone else replace brakes before hitting 10k?

I have 36,000 miles on a 2008 Spyder. Yes they are the originals. I have not changed them out since they are within spec. They do not squeal. I think you need a better dealer or there is something seriously wrong with your bike.