First impressions Airhawk

[Roadster Renovations]

Still looking for size recommendations for the "R" cushion on a 2015 RT factory seat. They list a small and a large, 11x11 or 14x14. Any photos would be appreciated.

Think the one I have is a small....

 

[Ranman42]

Air Hawk

Still looking for size recommendations for the "R" cushion on a 2015 RT factory seat. They list a small and a large, 11x11 or 14x14. Any photos would be appreciated.

I have an airhawk 2 cruiser medium. Think it was a version before the R. It is 14.25 x 14.5 x 2 inches. I have a 2016 RT-S with stock seat and it fits fine in either driver or passenger position. it comes with straps to run under the seat but I don't use them. I originally brought it for another bike but the Spyder loves it.

Hope this helps.

 

[Uticat]

I have an airhawk 2 cruiser medium. Think it was a version before the R. It is 14.25 x 14.5 x 2 inches. I have a 2016 RT-S with stock seat and it fits fine in either driver or passenger position. it comes with straps to run under the seat but I don't use them. I originally brought it for another bike but the Spyder loves it.

Hope this helps.

Thanks, appreciate your input.

 

[ARtraveler]

I have an airhawk 2 cruiser medium. Think it was a version before the R. It is 14.25 x 14.5 x 2 inches. I have a 2016 RT-S with stock seat and it fits fine in either driver or passenger position. it comes with straps to run under the seat but I don't use them. I originally brought it for another bike but the Spyder loves it.

Hope this helps.

Cruiser medium here. I got mine before there was an R version. The R large has about the same dimensions. :yes:

 

[stu]

i bought two large r for the front and back,dont know sizes but the r large will work fine.fiddle with the air and they are great.

 

[rudym]

for those so inclined

:agree: And they seem to fit for both the rider and passenger positions equally-well! :thumbup:
The Missus sits on one of them... I just snuggle down into the sheepskin seat cover...

But I DO think that they should offer a "Whoopie Cushion" option! :roflblack:

Personally not my thing, but, I wasn't surprised to learn of: https://www.amazon.com/Motorcycle-Sportbike-Cruiser-Passanger-Vibrator/dp/B00NZF8GTE
coming from the wild side of the two wheeled world.

 

[Av8er]

Personally not my thing, but, I wasn't surprised to learn of: https://www.amazon.com/Motorcycle-Sportbike-Cruiser-Passanger-Vibrator/dp/B00NZF8GTE
coming from the wild side of the two wheeled world.

:clap:Too funny!!

 

[Kredab]

Still looking for size recommendations for the "R" cushion on a 2015 RT factory seat. They list a small and a large, 11x11 or 14x14. Any photos would be appreciated.

Just got the large "R" , it fits perfectly on the front and back of the stock seat on my Rt-s

First ride was interesting, I thought I had to much air in it, I was rolling over the top of it, almost let all the air out, it was much better. Seems like you want to run very little air in it .

Ordered it thru Walmart.com for great pricing, will see how this works, then buy another so we have both seats covered :spyder2::spyder2:

 

[Peteoz]

First ride was interesting, I thought I had to much air in it, I was rolling over the top of it, almost let all the air out, it was much better. Seems like you want to run very little air in it .

Yep, that's exactly right, Kredab. Several others have posted earlier in the thread about the need to run it with minimal air. That effectively makes it operate like a poor man's Russell Daylong, where the seat wings curve up to support the outer thighs. With all your centre weight on the Airhawk, that forces any remaining air out and up providing that same outer thigh support....that's the way it was described to me by the Aussie distributor.:thumbup:

Pete

 

[AY4B]

I have a Corbin Lamonster cut and the Airhawk is like a custom match for it. The Lamonster has extra padding scooped out and the Airhawk fills in the gap. Tip: criss-cross the straps under the seat to give a better fit, also let the valve stem stick out the side and over inflate it. sit on it and slowly let the air out till it feels right. I also love the way the air re-distributes when you lean to aid in your twistie madness.

 

[rudym]

go purple

I use one of these: https://onpurple.com/seatcushions/buy

 

[jerrydonna]

Have had the Airhawk for 3 years, can't imagine riding without it. And, as mentioned before, you sit in it, not on ​it.

my old tail bone

 

[fraugher]

I installed the Airhawk R today, and it cures the monkey butt as advertised. But I like to drive my F3 Limited to the limits, and I am finding the Airhawk very instable, and it gives a rollover slide at inconvenient points in the turn. Am I doing something wrong? The raised center of gravity is also noticeable. I did not run it full but not flat either... I feel like less air would make it even more prone to movement. There is just a lot of ways for the top surface to move over the inner surface which can move relative to the bottom surface touching the seat. It really makes me lose all confidence in turns, like I am losing road feel, and the mid-turn shift can really give the machine a jossle. I am 5'10" 200 lbs. by the way, not the lightest or the heaviest with average length limbs. Otherwise the Airhawk delivers to correct the seat position and long term comfort

 

[Nobodyjj]

Use a medium cruiser Airhawk. Site in it, inflate then adjust while on it!

 

[bmwlarry]

You have too much air if you get a rollover feeling

 

[Peteoz]

As bmwlarry says, they need to be run with minimal air pressure. The Airhawk works along the principles of Russel Daylong, where the raised wing on the side of the seat supports the outer thigh. Your bottom should be effectively touching the seat, which squeezes the air in the airhawk out to the sides, thus supporting your outer thighs. That’s the Daylong principle also for longer term comfort.

Pete

 

[fraugher]

Thanks everyone, I had read this thread but somehow missed the key post about this... I was running with low air, but I can see that it should be even lower. I will try that today and if not, MotorcycleDave's I think would work for me. The idea of the medium is intriguing too, if I have a small butt