Got em installed! Excuse the mess! Followed Doc's & BRP instructions. I did have the dealer cut it for me, was well worth the $50 they charged me. Cannot wait to test.
Sent from my iPhone using Tapatalk
Make sure the plastic caps that cover the holes for the two bolts are seated properly. They are a little bit of a bugger to get clipped in. I saw a lot of pictures of the new vents and those covers were missing.
Installed them on my 2014 RTS and have been happy ever since. You will find that the heat is no longer in your glove box or between the glove box and seat. MUCH cooler.
Yeah I pushed and pushed on them. Hopefully they stay in!
Sent from my iPhone using Tapatalk
looks like there is a trip to the dealer in my future, Or is there someplace after market I can get them?
I have a 2011 RTL that I have to park outside the garage after long rides until the gas smell goes away. This happens when the gas tank heats up on longer rides and boils the gas. I am hoping this air scoop kit may solve my heat buildup problem. If I can't get BRP to supply the kit I'll get it from the Powersports Warehouse for $46.89.
http://www.powersportswarehouse.com/pages/oemparts#/s/BRP//219800388
I have a 2011 RTL that I have to park outside the garage after long rides until the gas smell goes away. This happens when the gas tank heats up on longer rides and boils the gas. I am hoping this air scoop kit may solve my heat buildup problem. If I can't get BRP to supply the kit I'll get it from the Powersports Warehouse for $46.89.
http://www.powersportswarehouse.com/pages/oemparts#/s/BRP//219800388
If you haven't already consider removing the 2 splash pans under the engine for even better air flow with the scoops.
I removed the two splash pans a couple years ago. It helped a little but not enough. Hoping the air scoop kit is the answer for my heat problem.
They have to be oriented correctly. Then they will pop in easily.Yeah I pushed and pushed on them. Hopefully they stay in!
They have to be oriented correctly. Then they will pop in easily.