• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

RT VIN #

Cruzr Joe

New member
Do any of you techies have a photo or real good instructions on where the VIN is on a 2015 RT Limited?? :dontknow::dontknow::dontknow:

Cruzr Joe
 
It's on the left-hand side of the swingarm, and is up sort of near where the rid-height strut attaches to the swingarm. (near the rearmost edge of the bodywork...)
 
It's on the left-hand side of the swingarm, and is up sort of near where the rid-height strut attaches to the swingarm. (near the rearmost edge of the bodywork...)


Thanks (left hand side is the rock hand side and right hand side is the gun hand side except when you turn around, right??)

Cruzr Joe
 
Billy made it too east for you... :roflblack:
I was gonna tell you that it's the side that you keep your wristwatch on. :D

Billy
GREAT picture: I'm grabbing a copy of it, for the next time that Joe gets turned-around! :thumbup:
 
Joe, for those DMVs that require seeing the VIN stamped on the frame it's on a vertical part of the frame on the right hand side immediately below the upper A-arm mounting bolt. Kind of hard to see and not easy to read either.
 
:shocked: I could never quite get my eyeballs on that one... :banghead:
Has anyone ever been able to take a picture of that location? :dontknow:
 
Billy made it too east for you... :roflblack:
I was gonna tell you that it's the side that you keep your wristwatch on. :D

Billy
GREAT picture: I'm grabbing a copy of it, for the next time that Joe gets turned-around! :thumbup:

Easy to find. I copied it from the 2015 RT Operator's Guide. :roflblack:
 
Here's a picture. To take it I turned the bars hard left and shot straight in at the frame member.
 

Attachments

  • Stamped VIN.jpg
    Stamped VIN.jpg
    46.7 KB · Views: 20
Back
Top