Shark radio install

[Nyparrothead]

Hi all,

i have ask several members but got no reply so here I go again.. Can anyone that has installed one of these units tell me how you mounted the speakers? Close up pics would be great

mark

 

[jtpollock]

I am not sure what you are mounting the Shark on but I have a complete post on the RS installation just look for SHARK AUDIO it's on the second page also Lamont installed the 1400 watt unit on the F3 :yes::thumbup: sorry you did not het a response the first time you asked for help. jtpollock

 

[SpyderF3-s]

My Install

http://www.spyderlovers.com/forums/showthread.php?91868-More-Farkles!

If you are installing on the F3 it depends if you have a windshield.

If you do not have a windshield, then you can use the bolts that mount the rails to the dash.

I have the BRP Blue Ridge windshield. I mounted 4 speakers. So I mounted the front two speakers using the front bolts of the dash rail. The back two speakers, I drilled holes in the rail (it is aluminum), tapped them and used 5mx12 bolts. I mounted the back speakers just ahead of the windshield bracket. If you need more pics, let me know.

Lamont mounted the speakers a little different but also drilled and tapped the aluminum rail.

 

[speedbuggy]

I have a Sharke 800watt stereo on my 2008 GS SM5. I mounted it on top of the dash where that slide out thing is and the
windshield.
I got rid of the pull thing that you are supposed to read, lifted off the plastic cover and screwed the stereo on that and put it back in place.

The speakers, I bolted on the dash sides.
Never had a problem with it, and it's very loud.

Easy install.

 

[cajunshredder]

Hi all,

i have ask several members but got no reply so here I go again.. Can anyone that has installed one of these units tell me how you mounted the speakers? Close up pics would be great

mark

Check my pics in my previous post.