-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Cruising RPMs
- Thread starter rpopdan
- Start date
Bob Denman
New member
:welcome:
The 1330s are happy at whatever rpm you let them run...
I'm into 6th gear at just under 40 mph, and no problems at all! nojoke
These are "torquers"; not "revvers".
The 1330s are happy at whatever rpm you let them run...
I'm into 6th gear at just under 40 mph, and no problems at all! nojoke
These are "torquers"; not "revvers".
ARtraveler
R.I.P. Dwayne
3000 - 3500 is usually where I make a shift. I let the sound of the motor be my guide. The 1330 will run at 50 mph in 6th gear very nicely. I let it downshift on its own.
Last edited:
latony007
New member
i can tell you that if you shift according to the Eco mode its around 3000, however that still does not seem to save any gas. These things just suck down the petrol. That in itself would not bother me, i did not buy it to be fuel economical, but the fact they state you can get 250 miles out of a tank is no where near close on mine, so far. Maybe not hitting break in yet makes a difference but i doubt that big of a difference.
Devious56
New member
I think that is a rather confusing question. Optimum for what? Speed ( how fast do you wan t to go ), gas mileage, comfort, enjoyment, the list goes on. What is optimum for one person, in not necessarily optimum for some one else.
David
Bob Denman
New member
I'm averaging over 39 mpg with mine... and can consistently travel over 200 miles between fuel stops...
My longest ride has been 220.3 between stops, and the bike took5.37 gallons: 41 mpg
250 miles DOES seem plausible; just not practical!
latony007
New member
maybe i will see a difference after break in (im at about 550 miles) but i just rode 130 miles using the eco mode and shifting really low like it wants you to and i have 135 miles with 2 out of 9 bars left on the fuel gauge. Seems like that first bar drops off as soon as you leave the gas station
Bob Denman
New member
It's the same benefit that you have in a car... better fuel economy, by allowing you to run lower rpms at highway speeds! 
When you have this much more "grunt" down low; you might as well take advantage of it!
We're actually making as much torque at 2,000 rpm, as the 998s do at their peak!
When you have this much more "grunt" down low; you might as well take advantage of it!
We're actually making as much torque at 2,000 rpm, as the 998s do at their peak!
Attachments
Last edited:
I guess my question would be better asked: Why would you need 6 gears if your hitting 6th at 40mph? That seems like a lot of senseless shifting? Fuel mileage concerns between 0-40mph?? I don't know man...
Can or have you tried skipping gears?
Sent from my Nexus 6 using Tapatalk
Can or have you tried skipping gears?
Sent from my Nexus 6 using Tapatalk
Cars/trucks with the new auto transmissions are different. My Jeep for example has an 8spd gearbox but it doesn't cycle through all those years all the time. It will skip gears when accelerating, downshifting etc etc.
Oh, and I don't need the brochure....I'm beyond the koolaid drinking sales pitch....[emoji23] [emoji23] [emoji23]
Sent from my Nexus 6 using Tapatalk
Oh, and I don't need the brochure....I'm beyond the koolaid drinking sales pitch....[emoji23] [emoji23] [emoji23]
Sent from my Nexus 6 using Tapatalk
Last edited:
Bob Denman
New member
...Just pointing out that the 1330s produce the same torque at those ridiculously low rpms; that the 998s do at their peak... :thumbup:
I put the "Sales Pitch" in the thread, for those who aren't aware of the differences in the engines...
I knew; that you knew!
I've never tried skipping gears with the ESSIES; can you even do that? :dontknow:
I put the "Sales Pitch" in the thread, for those who aren't aware of the differences in the engines...
I knew; that you knew!
I've never tried skipping gears with the ESSIES; can you even do that? :dontknow:
Last edited:
I get what your saying but it just doesn't make sense. Take fuel efficiency out of it for a minute... Since its silly to figure fuel economy under 40mph...IMHO.
If you have a flat torque curve that extends across most of the rev band then having a bunch of gears stacked right on top of each other doesn't seem like the best setup unless towing or under powered. It would be pointless because the motor is making similar power over an extended rev band....why shift 2 times when you can carry the same gear, same power, same momentum for 1 shift. Short gears is something you typically due to maximize momentum when under powered, very limited rev band, or heavier load demands, to keep an engine at a specific rev area (power band).
Seems to me if your in top gear at 40mph and riding correctly you are SERIOUSLY over geared. That's a lot of shifting to 40mph and riding around under 40 would be silly changing all those years. Seems like they could have accomplished the same thing with only 4 gears?
Sent from my Nexus 6 using Tapatalk
If you have a flat torque curve that extends across most of the rev band then having a bunch of gears stacked right on top of each other doesn't seem like the best setup unless towing or under powered. It would be pointless because the motor is making similar power over an extended rev band....why shift 2 times when you can carry the same gear, same power, same momentum for 1 shift. Short gears is something you typically due to maximize momentum when under powered, very limited rev band, or heavier load demands, to keep an engine at a specific rev area (power band).
Seems to me if your in top gear at 40mph and riding correctly you are SERIOUSLY over geared. That's a lot of shifting to 40mph and riding around under 40 would be silly changing all those years. Seems like they could have accomplished the same thing with only 4 gears?
Sent from my Nexus 6 using Tapatalk
Bob Denman
New member
:dontknow: I didn't design the transmission, or the shifting parameters it... :dontknow:
I'm just having fun running it; that's all!
I'm just having fun running it; that's all!
Devious56
New member
There is enough torque that you can short shift and still have the power to move along. And riding around, shifting at 3,000 rpm will give you between 35 and 40 mpg. But, if you are in a hurry, you can always run it up to 8,000 rpm and let the tears of joy roll down your cheeks. But don't think about gas mileage at that time, just enjoy the blurry scienery as it goes by.
David
David
Similar threads
