Can am RT radiator right inlet cover😳 as

[steriltech]

Hi all I know that the RT right radiator cover is not suppost to be there but dose anyone have a matching one to the left side???? Wanted to ask thanks

 

[Bob Denman]

BRP actually sells one for the 2014 and later RTs, and it can easily be adapted to fit. :thumbup:

 

[oldguyinTX]

Can-Am Part number 705004803 Right Hand Grill $18.99. Easy install.

 

[Larry rt]

I tried brp Web site, part number, description and get nothing! What is this dumb guy doing wrong? HELP

 

[IdahoMtnSpyder]

I tried brp Web site, part number, description and get nothing! What is this dumb guy doing wrong? HELP

Looking for a part that doesn't exist for 2013 and earlier? :dontknow: You need to look for the 2014/15 grill and modify it a little bit to fit the 2013 & earlier. And use all kinds of ingenuity to figure out where in the parts list the **** thing exists and what kind of name some clueless BRP draftsman/engineer/tech writer gave it. Finding parts in the BRP parts lists & diagrams is a real pain in the rear at times. There are cases where the same part referred to in the owner's manual, the service manual, and the parts list has three different names.

 

[oldguyinTX]

It is hard to find, as there is no option for a search on the BRP site. You have to go the the genuine parts page, click roadster, click 2014, click Spyder, click RT Limited SE6 2014, click the first 09 body and accessories 31Y1403, item 312, part # 705004803. Pain in the :cus: but it is there.

 

[robmorg]

Here's the Link

Here is the link on BRP's web site to where OldguyinCT is talking about above...
http://parts.spyder.brp.com/Index.aspx?s1=udtq248vk0ruqu665k3g9sh841&catalog_id=0&language_id=1&siteid=1

Here is the "feed in" page to that. You get to it by following Spyder -> Accessories -> Genuine Parts on the home page menu.
http://can-am.brp.com/spyder/genuine-parts-accessories-riding-gear/genuine-parts.html

Then, after selecting the proper year and model of Roadster, you follow down the list to the part section you want - in this case 09 Body & Accessories. Then you must find the part on the picture and follow the number (312) to the part listing.

It's actually MUCH easier to find it on the Pitbull Power Sports Parts Finder Page. That's where I found it and then I just ordered it from Pitbull. But with the part number, your local dealer can order it for you as well and probably won't charge you shipping.

 

[Larry rt]

Thanks for the help! This is a great family we have on this site! :clap:

 

[Pirate looks at --]

Mods

What sort of Mods do we need to make to make it fit on the 2013?

 

[robmorg]

What sort of Mods do we need to make to make it fit on the 2013?

You just need to trim a little plastic off the bottom edge of the block-off plate for the lower vent opening, so that it fits into the 2013 lower vent. It then fits right into place. There is a tab on the right side that you can fasten to an existing interior panel with a machine screw. The top just fastens in as it normally would. That's all there is to it. :thumbup:

 

[IdahoMtnSpyder]

What sort of Mods do we need to make to make it fit on the 2013?

Here's what I did to use it for an upper heat block.
http://www.spyderlovers.com/forums/showthread.php?69303-My-upper-heat-block-mod