• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Is there a 2014-15 Gas Cap Issue on some models?

robhowen

New member
I received the following that is supposed to be from Facebook. I don't know if it is a collection of thoughts, feedback, comments, or what. What I received was two pages long. I've shorted it to make it a quicker read, as I think you'll get the jest. Is there a gas cap issue and have any of you on the forum experienced such?

Rob

From Facebook posts ...............

  • There have been some increasing reports lately regarding the BRP gas caps; some have been locking or breaking when trying to unscrew them.
  • I got the dreaded broken gas cap tonight on my 2014 RT-S.The gas cap just would spin in either direction freely. Thank god I was home to use my large channel locks to break/remove the gas cap.I had like no gas in the tank to ride to the dealers to remove the cap.I called my dealer and they said bring the broken cap in tomorrow and they have replacements in stock.Better to happen at home then on the road.I just hope the new gas cap is years of trouble free service
  • I guess this is common?
  • Suggest replacing with Stant gas cap, don't take a chance. Stant gas cap #10835 at Advance Auto Parts or #11835 at Pep boys. The Stant replacement has a better design that avoids the problem. As you unscrew the cap, the first quarter turn relieves any internal pressure or vacuum allowing the seal and cap to come off without difficulty.
  • Is all on 2014 and 2015 models!!!!!
  • I have not seen a person with a recalled cap complain of this (2010-2013 models).
 
Last edited:
There is a Service Bulletin out on 2014 RT gas caps.
Replaced under warranty.

Had mine done 1 month ago.

AJ

I received the following that is supposed to be from Facebook. I don't know if it is a collection of thoughts, feedback, comments, or what. What I received was two pages long. I've shorted it to make it a quicker read, as I think you'll get the jest. Is there a gas cap issue and have any of you on the forum experienced such?

Rob

From Facebook posts ...............

  • There have been some increasing reports lately regarding the BRP gas caps; some have been locking or breaking when trying to unscrew them.
  • I got the dreaded broken gas cap tonight on my 2014 RT-S.The gas cap just would spin in either direction freely. Thank god I was home to use my large channel locks to break/remove the gas cap.I had like no gas in the tank to ride to the dealers to remove the cap.I called my dealer and they said bring the broken cap in tomorrow and they have replacements in stock.Better to happen at home then on the road.I just hope the new gas cap is years of trouble free service
  • I guess this is common?
  • Suggest replacing with Stant gas cap, don't take a chance. Stant gas cap #10835 at Advance Auto Parts or #11835 at Pep boys. The Stant replacement has a better design that avoids the problem. As you unscrew the cap, the first quarter turn relieves any internal pressure or vacuum allowing the seal and cap to come off without difficulty.
  • Is all on 2014 and 2015 models!!!!!
  • I have not seen a person with a recalled cap complain of this (2010-2013 models).
 
my gas cap on my 2014 was difficult to take once... has not done it again... maybe I should consult my dealer before getting stranded ..

osm
 
When it goes bad you can not get it off w,ithout proper tools so hope u have enough gas to get to dealer
 
I have a 2015 and I'm going to purchase the Stant cap at Pepboys as I don't want to take the risk. A new cap is something like $7; not worth the risk of not being able to get my cap off and I suspect the 2015 factory cap is the same as the 2014 one (not a fact, a guess).

Rob

There is a Service Bulletin out on 2014 RT gas caps.
Replaced under warranty.

Had mine done 1 month ago.

AJ
 
I did't wait till I had trouble. A new stant is only nine bucks. Got one at advance auto last evening.
 
I had posted a few weeks ago a PN for Stant cap we have been using with no problems. The cap has a vacuum vent and a vacuum release as you loosen the cap. Stuck the oem cap in the frunk. Cap at Walmart was less than $10.

PK
 
This happen on my sts

I had posted a few weeks ago a PN for Stant cap we have been using with no problems. The cap has a vacuum vent and a vacuum release as you loosen the cap. Stuck the oem cap in the frunk. Cap at Walmart was less than $10.

PK

Before my trip i filled up , when i got to my destination i wanted to fill up again and my gas cap kept turning . the cap was making a clicking sound but will not open . My tech blames this on the heat . I think he is correct . I left the bike cool down for bout 2 hours and checked again , the cap open with no issues . So now i just do not close the cap tight. I called my dealer and he said he heard of this happening to couple units . The heat expands the nozzle of the cap and then will not open . Cap is not quality. Getting a new one soon.
 
I had posted a few weeks ago a PN for Stant cap we have been using with no problems. The cap has a vacuum vent and a vacuum release as you loosen the cap. Stuck the oem cap in the frunk. Cap at Walmart was less than $10.

PK

Stant 10835?
(AutoZone)
 
Stant 10835?
(AutoZone)

No sir, Stant 10819 from Walmart. I went with this cap for two reasons.

http://www.walmart.com/ip/Stant-10819-PRE-VENT-Fuel-Cap/16783614

1) This cap has a vacuum vent. after seeing the other guys fuel cell collapse from a failed vent system, I wanted a cap that would be sealed with pressure and not leak fuel, while capable of allowing air in as a failsafe in case of an oem vent valve failure. The oem fuel cap has no venting at all. Basically a cork. Whether it is heat, positive or negative pressure sealing the cap I have no idea. If there is vacuum on the tank, or pressure on the tank, it could make removal more difficult.

2) The Stant cap has the ability to vent the tank to ambient pressure prior to loosening the fuel cap. The handle during removal, opens a valve that bleeds of pressure or vacuum. Basically the handle is rotated but the cap remains secure, when the handle is full open, the cap loosens.

PK
 
Thanks for posting this. Is the cap a recall item that I can aquire for free, or should I just go out and purchase the one posted here?
 
I had posted a few weeks ago a PN for Stant cap we have been using with no problems. The cap has a vacuum vent and a vacuum release as you loosen the cap. Stuck the oem cap in the frunk. Cap at Walmart was less than $10.

PK

From Walmart; Same brand and part # ? I dont have an Advance or Pep Boys near me.

Anyone; I have the ST-Limited......I will assume at this point that all caps are the same ?.....will fit my Spyder.

Thanks !!! :clap:
 
I purchased both the 10835 and the 10819 and the pre-vent feature of the 10819 is clearly there versus the 10835. Both seem to seal and fit perfectly. I'll keep the 10819 on the bike as the pre-vent feature seems like the right thing to me. I purchased the Stant 10819 from Amazon while I got the other one from Pepboys. Both are available on Amazon as well.

Thank you PK for your explanation.

Rob


No sir, Stant 10819 from Walmart. I went with this cap for two reasons.

http://www.walmart.com/ip/Stant-10819-PRE-VENT-Fuel-Cap/16783614

1) This cap has a vacuum vent. after seeing the other guys fuel cell collapse from a failed vent system, I wanted a cap that would be sealed with pressure and not leak fuel, while capable of allowing air in as a failsafe in case of an oem vent valve failure. The oem fuel cap has no venting at all. Basically a cork. Whether it is heat, positive or negative pressure sealing the cap I have no idea. If there is vacuum on the tank, or pressure on the tank, it could make removal more difficult.

2) The Stant cap has the ability to vent the tank to ambient pressure prior to loosening the fuel cap. The handle during removal, opens a valve that bleeds of pressure or vacuum. Basically the handle is rotated but the cap remains secure, when the handle is full open, the cap loosens.

PK
 
I purchased both the 10835 and the 10819 and the pre-vent feature of the 10819 is clearly there versus the 10835. Both seem to seal and fit perfectly. I'll keep the 10819 on the bike as the pre-vent feature seems like the right thing to me. I purchased the Stant 10819 from Amazon while I got the other one from Pepboys. Both are available on Amazon as well.

Thank you PK for your explanation.

Rob
​My dealer replaced my cap today under warranty. I'll be returning my Stant to Advance Auto Parts.
 
Good for you. I didn't want to wait as I didn't know how long it might take BRP to acknowledge the issue on 2015s and I didn't want to get caught with the inability to get the cap off.

Rob

​My dealer replaced my cap today under warranty. I'll be returning my Stant to Advance Auto Parts.
 
Back
Top