-
Very Active Member
Seat gas strut
On my 2015 RTL I added a factory drivers backrest. The gas strut will not hold up the seat and backrest when I get fuel. I want to replace the strut with a stronger one but can't find the rating of the factory strut. Does anyone know what pound rating the factory strut is?
-
-
Very Active Member
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
Very Active Member
Eddie Sheppard
Poole Dorset UK
Get a Spyder - See the World
-
I got this one. It is a lot stronger and almost pushes the seat up on it's own when you unlock the seat.
I have the Utopia backrest as well.
It is also a little longer so the seat goes up higher which I like.
Sachs SG359011
Got it on Ebay for $18
http://www.ebay.com/itm/Back-Glass-L...pVm-I2&vxp=mtr
Bob
-
Very Active Member
Originally Posted by Bob Denman
If you take your strut to a well-stocked auto parts store; it should be easy to match it up to one with a bit more "oomph" to it.
There have been several threads in here that list part numbers for acceptable replacements. Take a walk on the "wild side", with the Search button...
Used the search button as I always do and most of the threads were about stock replacements, didn't find a single one listing the pound rating as I asked.
You must have a super button and ex ray eyes if you found it.
-
Very Active Member
Originally Posted by finless
I got this one. It is a lot stronger and almost pushes the seat up on it's own when you unlock the seat.
I have the Utopia backrest as well.
It is also a little longer so the seat goes up higher which I like.
Sachs SG359011
Got it on Ebay for $18
http://www.ebay.com/itm/Back-Glass-L...pVm-I2&vxp=mtr
Bob
Thanks, got one on its way.
-
There you have it....
Isn't it a great site..?? best place for all your answers. ..
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Originally Posted by Fatcycledaddy
Thanks, got one on its way.
And just to help... Some folks try prying off completely the clips. DON'T DO THAT! It will deform them.
Here is how you remove the shock the easy way.
Bob
-
-
Very Active Member
This post made me very happy. I am on my second failure gas shock. BRP heated Comfort seat, BRP backrest and full fitted Sheepskin cover seem to be too much weight for the OEM shock. On my way to Auto parts store.
Thanks for posting.
Jack
All my life I wanted to be somebody, now I realize I should have been more specific.
2019 Specialized E-Bike COMO 2.0
2018 Jeep Grand Cherokee Overland
2018 Tiffin Phaeton 37BH Motorhome
2015 BMW R1200R LC
2014 RTL SE6 Pearl White
2012 RT-622 trailer viper red
2014 Look 7x12 motorcycle trailer silver and black
2011 Polaris Ranger green
2013 GMC Yukon Denali XL silver oak
2016 Can Am Maverick
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|