New sponsor here for Filters & Sway Bars

[Big Bird]

Ron, I need to know how much the wire set is. And how does the new sway bar compare to the early replacement/upgrade? i have one of those on the 'Bird...

[BajaRon]

Ron, I need to know how much the wire set is. And how does the new sway bar compare to the early replacement/upgrade? i have one of those on the 'Bird...

Anytime you want to see what I've got & pricing you can click on my Banner Ad on the Home Page here at Spyderlovers.com. The banner ad below will also get you there.




I carry 2 wires set versions, MSD (RED) and Accel (Black). They are of similar construction using the same process to get spark from the coil to your Spark Plug (Low resistance Spiral Wound Copper Alloy Wire instead of the OEM High resistance Carbon Impregnated Core). The Accel wire is thicker (8.8mm to 8.5mm and the Accel outer skin is more heat and cut resistant than the MSD wire). However, both will perform very will on your Spyder.

The problem with any high resistance carbon core wires is not just the spark robbing attribues of this kind of conductor, but it also breaks down as electrical current passes through it and is very susceptible to heat, vibration and manipulation damage.

There is a lot of heat under our Tupperware and our wires are routed right above the exhaust and between the cyclinders giving these carbon core wires a real workout.

When I first started selling just the Iridium spark plugs the rumor began that this type of spark plug was bad for the Spyder because after installation the engine ran so poorly. It was logically assumed that the new Iridium plugs were to blame. But it was not the spark plugs at all, it turned out that the fragile OEM wires were irreparably damaged during spark plug replacement.

The MSD wire set is $65.00 delivered and the Accel is $72.00 delivered. Dielectric grease and Thermal Past included.

The Accel wire costs me more so that is why the price difference. I highly recommend installing a good quality Iridium spark plug of the correct heat range with my wire set. They complement each other very well and you will get the maximum performance and longevity from your ignition system that way. I sell the NGK Iridium spark plugs for $17.00 a set delivered.

For the Sway Bar, I assume you are referring to the EVO (Evoluzione) products that are now discontinued. My bar is a bit stiffer than the last version of the EVO bar. Comparing my bar to the EVO bar I had on my Spyder, it is of better quality than the EVO bar.

I cannot speak to the earlier versions of the EVO bar because I never owned one. But my feeling is that they used the same basic materials for all of their versions so the same would hold true.

For Payment I can invoice your Paypal account by email. Very easy and quick. You can also mail payment if you prefer. Both work just fine.

[Big Bird]

Anytime you want to see what I've got & pricing you can click on my Banner Ad on the Home Page here at Spyderlovers.com. The banner ad below will also get you there.

...

Ron, I click on the banner ad and it just keeps looping to the forum ... and thank you for your quick and informative response. I cannot seem to get to your 'catalog' page... Glenn aka Big Bird

[BajaRon]

Anytime you want to see what I've got & pricing you can click on my Banner Ad on the Home Page here at Spyderlovers.com. The banner ad below will also get you there.

...

Ron, I click on the banner ad and it just keeps looping to the forum ... and thank you for your quick and informative response. I cannot seem to get to your 'catalog' page... Glenn aka Big Bird

Right now that is my catalog page. It's a forum post with the items that I have that are Spyder specific. I don't list jackets, helmets, etc., there because it would take quite a bit of room.

If you're looking for something that is not listed on that forum page just PM or email me at fyredad@hotmail.com