-
07-03-2014, 11:36 AM
#501
For Black Currant: It came as a left and right "kit". The left side was 219800347. The Right side is 219800348 (just found the part number)
Last edited by ARCTIC; 07-05-2014 at 10:12 AM.
-
07-03-2014, 12:03 PM
#502
side panel kit
Originally Posted by azjerry
I know, I can't find them either but that is what is on my invoice from the dealer.
Part number Description Price
219800343 ___1 KIT PANEL - YELLOW LH 333.99
219800344 ___1 KIT PANEL - YELLOW RH 333.99
This was from RideNow Powersports in Surprise AZ.
whats the chance of getting a pic or two???????
-
07-03-2014, 03:06 PM
#503
me too
On another note, I do notice that, sometimes, I get a little shudder on take off in 1st (SE5), and sometimes in reverse. Seems to go away when it's warmed up, but, again, only had it for 5 days.
Thought?[/QUOTE]
But it seems after a 1/4 to 1/2 mile after it starts to warm up a little it is good.
-
07-03-2014, 03:12 PM
#504
JT's filter
Originally Posted by SNOOPY
Personally, I think it is a combination of things.
You did one main thing, the other it changing out the air intake system to the JT air filter.
Adds much needed room for air to flow!
Rides nice in 90 deg weather...you would need to tell me about 105 deg.... Ohsnap!
.
Works great, it solved most of the issues. I may decide to do the side panels over the winter for added cooling. I have to wait a while, already spent way more $'s on this Spyder than I intended. My Elka's just shipped yesterday, front & rear. So I think I am finished for the season with upgrades.
-
07-03-2014, 04:44 PM
#505
Originally Posted by progt
whats the chance of getting a pic or two???????
Do you want a pic of the bike with the panels or the invoice?
-
07-03-2014, 04:54 PM
#506
-
07-03-2014, 04:55 PM
#507
That might be hard to read. I'll post photos of the bike in a little while.
-
07-03-2014, 05:08 PM
#508
New panels
IMG_1332.jpg
IMG_1335.jpg
The new panels are the ones with the CAN AM decal and the one with the black foglight housing.
-
07-03-2014, 05:13 PM
#509
Very Active Member
Originally Posted by 900Dave
Works great, it solved most of the issues. I may decide to do the side panels over the winter for added cooling. I have to wait a while, already spent way more $'s on this Spyder than I intended. My Elka's just shipped yesterday, front & rear. So I think I am finished for the season with upgrades.
Your second sentence is funny, extra cooling in the winter...
.
-
07-03-2014, 05:14 PM
#510
-
07-03-2014, 05:16 PM
#511
In post #483 I noted that when I rode home from the dealer with the new panels, the temp on the left side was 162 degrees (F) so I thought there was no improvement. It is quite hot in AZ this time of year, over 100 plus the relentless sun beating on everything. So just for fun, I parked my Nissan Xterra in the driveway in the sun this morning. It is about the same color yellow as the Spyder. In less than an hour the side of the X was 158 degrees. So I can't say the new Spyder panels won't be an improvement. I just won't be able to really find out for a few months.
-
07-03-2014, 06:35 PM
#512
Very Active Member
I'd move
-
07-03-2014, 08:39 PM
#513
Originally Posted by SNOOPY
Your second sentence is funny, extra cooling in the winter...
.
That did not come out right, but I think you know what I mean.
-
07-03-2014, 09:24 PM
#514
-
07-05-2014, 02:03 AM
#515
I was wondering what the wait time from order to delivery. I paid
In full w/2day UPS. Powersportswarehouse stated that my order is in process. It's almost 2wks no
Last edited by ranps1; 07-05-2014 at 02:08 AM.
-
07-05-2014, 06:47 AM
#516
Very Active Member
Originally Posted by ranps1
I was wondering what the wait time from order to delivery. I paid
In full w/2day UPS. Powersportswarehouse stated that my order is in process. It's almost 2wks no
Mine took a couple weeks from Powersports warehouse also for some reason.
I think they had told me everything came in quick except for one part...and they wait to ship it all together.
-
07-05-2014, 10:44 AM
#517
What does it cost for the complete kit?
-
07-05-2014, 12:07 PM
#518
-
07-05-2014, 04:03 PM
#519
I did that. BRP just referred me to the dealer to order the panel kit. Of course, I just wrote one time, I think Jaque had extended correspondence and records of her attempts at resolving the issue. My dealer service guy told me that it seems the people who take the time and effort that Jaque did are more likely to get BRP attention and get resolution. Those like me who ask once, get ignored, just take care of it ourselves and be done with it.
-
07-05-2014, 04:06 PM
#520
Originally Posted by Speedy Spyder
What does it cost for the complete kit?
See post #506.
Cost me 743, installed by dealer. Took just under a week for them to get the kit direct from BRP.
-
07-05-2014, 05:22 PM
#521
I DID
I sat here one evening a few weeks ago and typed an e-mail to BRP care. They did not care enough to respond.
-
07-05-2014, 07:19 PM
#522
Originally Posted by 900Dave
I sat here one evening a few weeks ago and typed an e-mail to BRP care. They did not care enough to respond.
Copy and paste it and resend another one
-
07-05-2014, 07:26 PM
#523
Panels
I have been following a lot of the conversations and modifications that people have made to resolve the heat issues on the 2014 STs...and was thankful that there was some relief people were getting but my bike didn't seem to get hot so I just read the posts and moved on.
Well... I didn't find mine to be hot to start with but it seems as soon as it reached about 3000 miles, it was getting hotter and hotter. I suffered through the heat without making any mods as I am not mechanical whatsoever and thought I would talk to the dealer when I took it for my 4600 mile service.
Told the dealer about the "hotness" and boiling gas issues I was having. Basically the dealer said that it was my problem, BRP knows about it and there is nothing that can be done...even though I discussed some options others were doing like wrapping pipes, removing lower panels, increasing heat shielding, etc. Still said there is ABSOUTELY NOTHING anyone can do and said "we searched the internet for you and there is nothing." Pretty cocky for a dealer who has received about $24,000 from our two Spyder family in less than a year.
Well, the day after I picked it up for the service, I went on a ride in 71 degree weather. Within 35 minutes of riding, I got a burn on my upper thigh from the intense heat coming out of the left upper panel near the gas tank. The burn turned into a third degree burn which was rather painful.
Ticked off, I called BRP Cares. Discussed it with them, they ran the vin and said there is no record whatsoever of being contacted by my dealer about the issue. They opened up a ticket and referred me back to my dealer. Dealer was ticked off that I called BRP.... made me wait three and a half weeks before getting the bike in..(I know you are thinking why take it back to the same dealer? they have a great reputation just don't want to deal with this I guess).
After it sat at the dealer for eight days, they said they took it on a short test drive, let it idle for two minutes and did a heat gun rating in the right foot well as instructed by BRP....said it was 168 degrees so that is not too hot....
I reminded them that it is not the right foot heat that I have a problem with as I ride with boots and long pants, it is the hot crotch and upper thigh heat on the left. Said we did what BRP said and that is it.
Well, my anger flew at the service manager and he ended up hanging up on me. I called BRP Cares and then while on hold waiting for the "next operator" I got buzzed in from the dealer. Said he told BRP Cares how angry I was and suddenly they are willing to try some options now. Dealer said they talked about some panels of some sort as he had never heard of them and said they won't match my bike but if they work that I can always get them painted at my expense.
I agreed to have them try anything they could as it is unrideable in temperatures above 65 degrees. I assume that these may be the panels they are referring to but who knows?
That was Thursday and today is Saturday...we will see what Monday brings as the dealer is expecting the shipment from BRP then. I will keep you updated.
-
07-05-2014, 08:18 PM
#524
-
07-05-2014, 08:48 PM
#525
Color
Originally Posted by ARCTIC
What color is your bike?
Oh yeah...the color is Circuit Yellow Metallic which I know a few people on here do have the new panels and the color does match which is what leads to my biggest confusion...go figure...who knows if the dealer or BRP know what they are talking about. Maybe it is some "other panels"...we will see.
Last edited by shoes8; 07-05-2014 at 08:51 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|