-
10-01-2022, 11:08 AM
#301
Very Active Member
James Thorne, next time you pull a sprocket / pulley, can you check if Rotax used a wear collar between the pulley and the output shaft bearing inner race.
Typically, manufacturers do not have the gearbox output shaft seal ride directly on the gearbox shaft. Most times a collar is slid over the shaft, sometimes using a small o ring to prevent leaks, that allows the seal to wear into the easily replaced collar.
If there is a collar, one would expect it to be made longer rather than install a washer.
Regardless, the pulley bolt merely keeps it from falling off the shaft. The splines provide the torque interface for motion.
-
10-01-2022, 11:47 AM
#302
Very Active Member
Originally Posted by PMK
James Thorne, next time you pull a sprocket / pulley, can you check if Rotax used a wear collar between the pulley and the output shaft bearing inner race.
Typically, manufacturers do not have the gearbox output shaft seal ride directly on the gearbox shaft. Most times a collar is slid over the shaft, sometimes using a small o ring to prevent leaks, that allows the seal to wear into the easily replaced collar.
If there is a collar, one would expect it to be made longer rather than install a washer.
Regardless, the pulley bolt merely keeps it from falling off the shaft. The splines provide the torque interface for motion.
When you pull the sprocket, you can see the face of the shaft seal. Its rubber faced. From the parts breakdown, the bearing is right behind that seal. The sprocket rides against the shoulder on the shaft, it does not touch the seal. Adding a collar will space the sprocket outward by the thickness of the collar. You are correct that the bolt, sprocket, shaft clamping has little to do with torque transfer or to keep the sprocket from moving on the shaft. That is the splines and the new collar will not change the play between the splines and therefore the fretting issue.
-
10-06-2022, 03:04 PM
#303
Im in Minnesota and my local dealers still dont have the parts and said the interim fix was actually just an inspection.
-
10-06-2022, 03:15 PM
#304
Why do that? They get paid for the work dont they?
-
10-17-2022, 09:20 AM
#305
Below is the link for the TSB for the inspection and interim fix.
https://static.nhtsa.gov/odi/tsbs/20...14930-0001.pdf
-
10-17-2022, 10:21 AM
#306
Very Active Member
.
A friend in our Battle Born Spyder group just had her F3 in the shop AGAIN for the sprocket fix.( first sprocket failed about 2 yrs ago) Now waiting for parts. BRP and CanAm needs to stop making the sprockets out of cheese AND solve this problem quickly as their reputation for quality and reliability may spread to their other products.
Last edited by Peter Aawen; 04-10-2024 at 05:54 AM.
Kaos----- Gone but not forgotten.
2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
-
10-17-2022, 02:23 PM
#307
Very Active Member
Last edited by Peter Aawen; 04-10-2024 at 05:54 AM.
2022 RT Sea To Sky
--------------------------------
-
10-17-2022, 02:56 PM
#308
Very Active Member
Originally Posted by Lew L
.
A friend in our Battle Born Spyder group just had her F3 in the shop AGAIN for the sprocket fix.( first sprocket failed about 2 yrs ago) Now waiting for parts. BRP and CanAm needs to stop making the sprockets out of cheese AND solve this problem quickly as their reputation for quality and reliability may spread to their other products.
I did not realize that BRP had a reputation for quality and reliability, or integrity for that matter. They really do not have a reputation for solving problems quickly.
Last edited by Peter Aawen; 04-10-2024 at 05:54 AM.
"A Wise Man Once Said, I Should Ask My Wife."
2017 Champagne Metallic RT-S SE-6 Rivco Dual Flag Holders; Slingmods Highway Pegs; (Hate Them) Airhawk Seat Cushion; Show Chrome Black Touring Rack w/ Risers & Touring Windshield; RAM X Mount For TXTAG; TackForm Phone Mount; Lidlox; Magic Mirror Mounts; Guardian Bells; WOLO "Bad Boy" Air Horn; Dual USB Power Outlet With Voltmeter; 12V outlet for misc. stuff; Spyderpops Full View Mirror Turn Signals; Large Brake Pedal; Kott Grilles; Large Mud Flap; BajaRon 3 Piece Sway Bar, Last But Not Least, Kuhmo Rear Rire, Vedrestien Fronts.
2017 RT-S , Brake pedal extender is twice the size of the stock pedal. Champagne Metallic
-
10-17-2022, 03:16 PM
#309
Very Active Member
Originally Posted by Lew L
cheese
Wrong color! Should be cheese! ! ! ! !
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
10-17-2022, 04:31 PM
#310
Very Active Member
Originally Posted by IdahoMtnSpyder
Wrong color! Should be cheese! ! ! ! !
One of my favorite cheeses is blue
AND:
In response to Fritz above about reliability, quality, and integrity--------
Just look up D.E.S.S, front sprockets, Kenda tires, switch gear, drain plugs, belt vibration, and I could go on and on. I haven't had all those problems with my but if we took all the forum members who did have reliability, quality, and integrity problems it would be a LARGE percentage.
Not attacking you Fritz........ just stating the obvious.
Kaos----- Gone but not forgotten.
2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
-
10-17-2022, 05:18 PM
#311
Very Active Member
anyone know why the 2014 1330s werent included in this? because they could get away with it? replaced mine last year on my 14 RT SE6 LTD with about 30k its the only thing my extended warranty has covered but ive only got about 35k on mine.
2012 RT A&C bought new 42312 sold July 2018 56k miles currently driving a 2014 RTSE6 LTD bought October 2018 w 6800 miles nicely farkled
-
10-17-2022, 05:39 PM
#312
Very Active Member
Put a complaint into your national vehicle safety authority and attach recall notice.
The best substitute for brains & knowledge is....................silence.
-
10-17-2022, 07:13 PM
#313
Very Active Member
Originally Posted by AbNormy
anyone know why the 2014 1330s werent included in this? because they could get away with it? replaced mine last year on my 14 RT SE6 LTD with about 30k its the only thing my extended warranty has covered but ive only got about 35k on mine.
Here are my thoughts about why that is the case. https://www.spyderlovers.com/forums/...=1#post1646273
Also this one in the same thread. https://www.spyderlovers.com/forums/...=1#post1647288
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
10-17-2022, 08:32 PM
#314
Very Active Member
-
10-18-2022, 07:43 AM
#315
If they'd only put the quality & craftsmanship into the Spyders as they do their snowmobiles, we'd be all set!!
-
11-07-2022, 01:26 PM
#316
Very Active Member
I stopped by my local dealer Saturday (happened to be the annual "Block Party at Kent Powersports, San Antonio, TX) and had a chance to talk with the service manager about the front sprocket safety recall. Here's what I learned. My 2015 RT-S will be inspected tomorrow (about 30 minutes). If there is visible excessive wear/damage a new sprocket will be installed as a stop gap while awaiting replacement parts from BRP. According to the manager that can be expected in January some time. Not a very good response by BRP to a federal government recall, but at least this dealership appears to be taking a proactive approach to the problem.
Has anyone else heard anything different? It would be interesting to know.
Last edited by Peter Aawen; 04-10-2024 at 05:55 AM.
Reason: He's - Here's
2015 Spyder RT-S (Arion) and 2021 RTL Sea to Sky (charming wife)
-
11-07-2022, 01:43 PM
#317
SpyderLovers Ambassador
... I talked with my Spyder Dealer and learned that they are waiting for some parts to come. No real answers yet about when they will get the parts. Still waiting...
Last edited by Peter Aawen; 04-10-2024 at 05:55 AM.
ENJOY YOUR LIFE WITH A SPYDER
Ryde with a Friend and be Safe
My Spyder ..... 'Little Blue-Boy'
-
11-08-2022, 11:46 AM
#318
The question is, are the current white sprockets available or they back ordered also, pending the final elusive fix???????
Dean O
Gran Pa Hoon
Founder San Jose BMW
Builder of the Motorcyclist Cafe Barn and Bunkhouse
Alamogordo, NM
'20 Spyder F3 L
-
11-08-2022, 12:44 PM
#319
Originally Posted by old Timer
The question is, are the current white sprockets available or they back ordered also, pending the final elusive fix???????
I ordered one in July or August (after the announcement of the recall) and received it. Can't say they are available "today' but they have been available post recall announcement for sure.
-----
Joshua
2016 Spyder F3S
2019 Spyder RT Limited
2022 Ryker Rally
-
11-11-2022, 11:30 AM
#320
I got my spyder (2019 Rt Ltd) from the shop with the warranty repair. It snowed last night so no riding today, but It drove off the trailer last night and up into my garage.
Freemont Motorsports in Florence Co.
Dropped off August 13, 2022
Picked up November 10, 2022
My sprocket was a complete failure. Lost all power to the rear wheel as I pulled onto the highway during a multi day ride. Engine Revved, loud noise but no power. I have a stinger trailer so I was able to tow it home from Durango to the shop.
Here's the sprocket. Very small ridges left on the inside. The mechanic was supposed to get pictures of the shaft but forgot. They said it looked fine with no serious wear.
20221110_151713-M.jpg
Here's a video of what it sounded like. The bike is in gear, brake is off. Revving gives no power.
Side note - Mechanic received the part last week but when they went to install it, the box actually contained a water pump. So I actually got the part destined for the next guy (Sorry about that) which arrived a few days later. I guess BRP still doesn't have their act in gear.
-
11-11-2022, 11:37 AM
#321
Very Active Member
Originally Posted by Arion
If there is visible excessive wear/damage a new sprocket will be installed as a stop gap while awaiting replacement parts from BRP.
That is exactly what my dealer (RideNow in Peoria AZ) did to mine back in June. Saved my riding season for me.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2018 F3 Limited - Intense Red Pearl . . . . . . . . . . . . . . . . . . . . . . . . . . .
-
11-11-2022, 12:39 PM
#322
Very Active Member
Originally Posted by ClayJ
The mechanic was supposed to get pictures of the shaft but forgot. They said it looked fine with no serious wear.
I'm not trying to be too negative here but I cannot imagine there is no damage to the output shaft with that pulley in that condition. Especially after revving it a few times like you did in that video. Hopefully you have a good mechanic who is being completely honest with you.
2022 Petrol Metallic RT Limited / 'PYDER'
Peter Pan has struck again!
-
11-11-2022, 12:47 PM
#323
Originally Posted by FrogmanDave
I'm not trying to be too negative here but I cannot imagine there is no damage to the output shaft with that pulley in that condition. Especially after revving it a few times like you did in that video. Hopefully you have a good mechanic who is being completely honest with you.
2020 RTL Chrome, Marsala Red "Non-Directional Tires, Centramatic Balancers"
Front- Kumho KH-16 175/55r15 @17psi, Rear-General Altimax RT-45 215/60r15 @20psi
BaJa Ron Ultra 3 pcs sway bar kit
10W40 Amsoil Synthetic Motorcycle oil
7jurock 25" tinted windscreen w/flip
Frogman Dave's "Signal Button"
If in Doubt, Don't Do It!
" Pros: Excellent Bug Killer, Cons: Pizz Poor Pothole Dodger"
-
11-11-2022, 12:53 PM
#324
Originally Posted by FrogmanDave
I'm not trying to be too negative here but I cannot imagine there is no damage to the output shaft with that pulley in that condition. Especially after revving it a few times like you did in that video. Hopefully you have a good mechanic who is being completely honest with you.
That's the whole problem with mechanics. You have to trust that what they are telling you is the truth because "Insurance won't allow customers into the shop to see for themselves". But in this case, I don't think they have any incentive to lie about it. If the shaft was damaged, they said it would be repaired under the recall. Still, it broke after only 2 years and 16K miles, so the sprocket was really soft to wear down that quick.
Has anyone produced a video about how to do your own check on the sprocket? I guess it's not too bad to pull a bit of tupperware and it's just right there.
-
11-11-2022, 02:52 PM
#325
Very Active Member
I've been busy and haven't been on SpyderLovers in awhile, so I was hoping to get on today and find good news on this topic. Why? because at approx 50K miles, my first sprocket failed, and then at approx 68K miles the second sprocket also failed and my spyder has been in the shop since mid October waiting for parts. I spoke to them earlier this week and they said that they had received the parts for the "final fix" on the recall and that it should be ready for me this week. Based on that conversation I scheduled my husband's recall fix for later this month. They called me yesterday to say mine was done so I rode it home (brrrrr!). I also asked my "regular" service contact about whether this was the "final fix" and he confirmed that's what he'd heard as well. He also said that the fix was to replace the sprocket. I replied that "this is my third... not sure I really trust that". Not much he could say in response other than agree. I guess time will tell. I was hoping to get on today and have a lot of others saying how they'd also gotten their recall issue resolved. I guess not
We now have His and Hers Spyders!
Current Spyder: White 2015 F3-S SE6
His Spyder: White 2015 F3 SE6
Previous Spyder: 2012 RT Limited SE5 -- 30,300 miles
Previous rides: Kawasaki & Honda
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|