-
SpyderLovers Sponsor
New Kenda Tires!
This is all I know. Didn't have time to look any further.
Kenda.jpg
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
-
Active Member
Originally Posted by BajaRon
This is all I know. Didn't have time to look any further.
Kenda.jpg
I have one in my garage, the rear tire. Kenda Kanine. Paid $96 including shipping from MotoSports.... waiting for the weather to warm up so I can have the dealer install. I guess I'll be the "test case". Still in the dark on what inflation pressure to use. I'll post the sidewall information from the tire when I get back in town. After I post the info, maybe someone can give me some recommendations on proper inflation, otherwise I'm going with 28 psi.
-
Customer Support
So I want to take this as good news that will eliminate the hassle of getting a dealer to put on a car tire.
Questions I have, is Kenda known for making a decent tire of any type (if no it doesn't mean this one isn't good, just not a great indicator) and since it "looks" more car tire spec size does that meant dealers may be more forgiving about putting on a car tire that is rated for the rim than they are now?
2015 Pearl White RTL
Baja Ron Sway Bar
Russell Day Long Seat
Strobe Brake Light
Mirror Mount Turn Signal Indicator
-
Active Member
Originally Posted by LeftCoast
So I want to take this as good news that will eliminate the hassle of getting a dealer to put on a car tire.
Questions I have, is Kenda known for making a decent tire of any type (if no it doesn't mean this one isn't good, just not a great indicator) and since it "looks" more car tire spec size does that meant dealers may be more forgiving about putting on a car tire that is rated for the rim than they are now?
I kinda doubt it. I do remember that the sidewall on my Kenda Kanine says "For Motorcycle Use Only". My dealer asked if that was on there and I said yes. He said, "OK, then I can install it". All the dealers in this neck of the woods won't substitute car tires on the Spyder.
-
I may just buy the full set and see how they do.
-
Very Active Member
https://www.motosport.com/product/?a...1-Y001&variant[KDAA009]=KDAA009-X001-Y001&variant[KDAA00A]=KDAA00A-X001-Y001
$230 for All 3 isn't bad if their decent?
2015 F3 sm6, Custom Dynamics fender lights.
Sea Doo GTI-SE 90 Jet Ski!!
-
Very Active Member
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Very Active Member
As you can see not much information out there yet.
Product Details
Kenda KR20 Kanine Tire
•Longer lasting than stock
•Better performance than automotive replacements
•Designed to work with ABS and TCS
•Blackwall
•Tubeless (TL)
•H-rated for speeds up to 130 mph
Specs for Kenda KR20 Kanine Tire
Tire Construction
Radial
Sidewall
Blackwall
Units
Each
Tire Classification
Cruiser
Speed Rating
H(130 MPH)
Type
Tubeless
Material - Tread
Steel
Material - Sidewall
Polyester
Sidewall Plies
1
Inflation Pressure
44 psi
Material - Tread
Polyester
Directional Arrow
No
Tread Plies
3
Front Tire Specifications
Brand:
Kenda
Part #:
-
Mfg #:
-
Sidewall
-
Bias / Radial
-
Speed Rating
-
Load Rating
-
Ply Rating
-
Tube / Tubeless
-
Rim Size
-
Tire Size
-
Front
2017 F3 Limited in Intense Red Pearl
2008 Triumph Rocket (SOLD)
2002 Honda VTX 1800 C ( SOLD)
2014 Triumph Thunderbird Commander
-
Active Member
Originally Posted by Ex-Rocket
As you can see not much information out there yet.
Product Details
Kenda KR20 Kanine Tire
•Longer lasting than stock
•Better performance than automotive replacements
•Designed to work with ABS and TCS
•Blackwall
•Tubeless (TL)
•H-rated for speeds up to 130 mph
Specs for Kenda KR20 Kanine Tire
Tire Construction
Radial
Sidewall
Blackwall
Units
Each
Tire Classification
Cruiser
Speed Rating
H(130 MPH)
Type
Tubeless
Material - Tread
Steel
Material - Sidewall
Polyester
Sidewall Plies
1
Inflation Pressure
44 psi
Material - Tread
Polyester
Directional Arrow
No
Tread Plies
3
Front Tire Specifications
Brand:
Kenda
Part #:
-
Mfg #:
-
Sidewall
-
Bias / Radial
-
Speed Rating
-
Load Rating
-
Ply Rating
-
Tube / Tubeless
-
Rim Size
-
Tire Size
-
Front
Just to clarify, I know mine has a directional arrow and they are clearly directional tires. Also the 44 psi is stated as Max pressure on the sidewall, not recommended inflation pressure. I'll post verbatim info from the sidewall when I get back in town.
-
Interesting how they make specific reference to "passenger car replacements" and being better than stock.
"Greater mileage than stock, better handling than passenger car replacements."
-
Ozzie Ozzie Ozzie
Originally Posted by HankD
I kinda doubt it. I do remember that the sidewall on my Kenda Kanine says "For Motorcycle Use Only". My dealer asked if that was on there and I said yes. He said, "OK, then I can install it". All the dealers in this neck of the woods won't substitute car tires on the Spyder.
Mind you, if it says this on the sidewall, then these tires are gonna be ILLEGAL for anyone to fit on an OE Spec Spyder rim here in Aust, cos our Spyders have 'J' type CAR rims & it's the legal responsibility of both the vehicle operator and the tire fitter to ensure that tires labelled 'MC' or 'Motorcycle Use Only' ARE NOT used on &/or fitted onto CAR rims & vice versa!!
However, all that aside, Kenda have been known to make some pretty good tires, but that does seem to be fairly dependent upon which factory they come out of & what their intended use is..... I guess we'll hafta wait & see. AFAIK, these tires aren't available in Aust (yet?) & from what I've been able to find out, there aren't any of the usual tire importers even considering them for Aust..... yet?!?
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
I wanted to replace the front two tires anyway, so I bought the front set of these new kendas. I guess I will find out how good they are.
$131.00 shipped for both.
-
Active Member
Anyone know offhand what the Max Inflation Pressure on the old OEM Kenda's is (Rear Tire)? I mean max pressure listed on the tire sidewall, not what the Spyder Owners Manual recommends. I just wanted to compare to the new Kanine. Thanks.
-
As someone mentioned, $230 for 3 is a good price, plus dealers can do the install without all the hassle. Maybe Kenda has it right..
-
SpyderLovers Sponsor
It says:
Max load 400kg(882lbs)at max inflation pressure 30psi
standard rim 7.0J
orig Kenda rear tyre
pres ride
2014 RT-S
bike is WIP
bike has endured elect spike (was jump started incorrectly)
still a WIP but bike is now running and registered....swapped out 5 modules mostly sourced from Canadian wrecker
-
Active Member
Originally Posted by merlot
It says:
Max load 400kg(882lbs)at max inflation pressure 30psi
standard rim 7.0J
orig Kenda rear tyre
Thanks!
So, the new Kenda Kanine rear tire is max pressure of 44 psi at 882 lbs. max load vs. the old OEM Kenda rear tire of 30 psi max pressure at 882 lbs. max load. The Can Am Spyder Manual for the old rear tire recommends 27-30 psi normal inflation pressure (near the max for that tire).
Just doing a basic scale-up using the max pressures would lead me to believe that the normal inflation pressure for the new Kenda Kanine tire should be about 40 psi? That seems kinda high. Any tire guru's care to chime in? I'm certainly no tire expert.
-
Very Active Member
Until the Actual specs are posted for this tire …. I will reserve judgement ….. guessing about this or anything else is a big mistake …… Mike
-
Active Member
Ok, I got my "better half" to read off the information from the Kanine rear tire I have in the garage. Here it is (it's all Greek to me):
005A (circled)
DOT 1K3 Max Load 400 kg (882 lbs.) AT
Max Press 300 kPa (44psi) COLD
For Special Motorcycle Use Only
Made in Taiwan
E4 (circled) 75R-0014862
Radial Tubeless
Standard Rim 7.0J
Tread 3 Plies (1 polyester + 2 steel)
Sidewall 1 Ply (1 polyester)
225/50R15 M/C 76H
Make any sense to anyone?
-
Ozzie Ozzie Ozzie
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Ozzie Ozzie Ozzie
Originally Posted by HankD
Ok, I got my "better half" to read off the information from the Kanine rear tire I have in the garage. Here it is (it's all Greek to me):
005A (circled)
DOT 1K3 Max Load 400 kg (882 lbs.) AT
Max Press 300 kPa (44psi) COLD
For Special Motorcycle Use Only
Made in Taiwan
E4 (circled) 75R-0014862
Radial Tubeless
Standard Rim 7.0J
Tread 3 Plies (1 polyester + 2 steel)
Sidewall 1 Ply (1 polyester)
225/50R15 M/C 76H
Make any sense to anyone?
Yep, the bolded & underlined bit ^^ makes the Kenda Kanines an ILLEGAL fitting choice for our OE Spec 'J' Type CAR (& Spyder) rims, at least here in Australia anyway!
Last edited by Peter Aawen; 01-21-2020 at 05:34 PM.
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Customer Support
2015 Pearl White RTL
Baja Ron Sway Bar
Russell Day Long Seat
Strobe Brake Light
Mirror Mount Turn Signal Indicator
-
Active Member
Originally Posted by Peter Aawen
Yep, the bolded & underlined bit ^^ makes the Kenda Kanines an ILLEGAL fitting choice for our OE Spec 'J' Type CAR (& Spyder) rims, at least here in Australia anyway!
Peter,
Using some research (done by you) previously on weight distribution, I think that a 2017 Spyder RTS with a normal load and a 175 lb rider (me) should weigh a total of about 1250 lbs. Using an estimate from your research of about 45% of that weight on the rear wheel, that puts the rear wheel load at about 560 lbs. With a second passenger, it would be up to 625 lbs on the rear tire. Given those (estimates).....what inflation pressure would you use for the Kenda Kanine rear tire given the specs I listed previously?
Thanks!
-
Ozzie Ozzie Ozzie
Bearing in mind that the ryder/pillion weight isn't all carried by the rear tire (because of the frame & suspension/swing arm/shock design, an increasing percentage of that weight, said % dependent upon the load on the rear frame, gets transferred forward & onto the front tires) so I'd be a little bit surprised if the rear of your Spyder actually got that high Hank. But IF the load on the rear tire is really that close to 300kgs, then given what we know so far, a rough 'educated guess' for your ideal pressure in that tire would be somewhere in the vicinity of 28-32 psi - BUT and please note well... that is pretty a rough guesstimate at this stage, because just like Mike said earlier, until the ACTUAL specs on these tires are made available, we really don't know enough about them yet....
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Active Member
Originally Posted by Peter Aawen
Bearing in mind that the ryder/pillion weight isn't all carried by the rear tire (because of the frame & suspension/swing arm/shock design, an increasing percentage of that weight, said % dependent upon the load on the rear frame, gets transferred forward & onto the front tires) so I'd be a little bit surprised if the rear of your Spyder actually got that high Hank. But IF the load on the rear tire is really that close to 300kgs, then given what we know so far, a rough 'educated guess' for your ideal pressure in that tire would be somewhere in the vicinity of 28-32 psi - BUT and please note well... that is pretty a rough guesstimate at this stage, because just like Mike said earlier, until the ACTUAL specs on these tires are made available, we really don't know enough about them yet....
Understood, I'm just looking for a place to START the process. Can Am and Kenda have been ZERO help with this, and I need to tell the dealer/installer..."Fill it up to XX psi". 28-32 isn't that much different than the stock OEM Kenda recommendations in the Owners Manual, but even with the increased "max" psi rating of the new Kanine I would feel safer starting off with a pressure that won't blow my tire up on the 80mile trip home from the dealer. I'll start with 30 psi/single rider and see how it goes Thanks for the help.
PS. What "actual" specs are you looking for. Something that I didn't list on the sidewall markings?
-
Very Active Member
Originally Posted by BajaRon
This is all I know. Didn't have time to look any further.
Kenda.jpg
These tires were discussed in another thread just about a week or 2 ago. Don't know offhand if there was different info in that thread or if most all the pertinent info is repeated below. Sorry, I'm too disinterested to bother to find the other thread!
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|