-
Tri Axis Adjustable Handlebar
Hi there. New to this site, so please have patience with me.
I just bought a 2014 RT Limited (3,000 miles). Love that thing.
I am looking at the Tri Axis Adjustable Handlebar and was wondering if I need to get the GPS holder as well. I currently have one, so, can I reuse?
-
Active Member
No the tri axis bars have a specific GPS holder you have to buy
Sent from my VS990 using Tapatalk
14 RT-S , Stock Large brake pedal White Pearl
-
Very Active Member
Make sure the GPS holder you buy fits your specific GPS.
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
-
Originally Posted by NM Wrench
No the tri axis bars have a specific GPS holder you have to buy
Sent from my VS990 using Tapatalk
So, just to verify: I would need the Tri Axis handlebar (219400344) and the GPS Support (219400616) - Garmin 660 - that will fit my Spyder?
Last edited by TexasLola; 02-24-2017 at 02:11 PM.
Reason: specify GPS
-
Very Active Member
Originally Posted by TexasLola
So, just to verify: I would need the Tri Axis handlebar (219400344) and the GPS Support (219400616) - Garmin 660 - that will fit my Spyder?
According to the 2016 catalog the GPS support part number you list is for the Zumo 590. The Zumo 660 support is a different part number. The support part number for the Zumo 660 is 219400322 according to the same catalog but it does not specifically say that it is the Tri-Axis bars support. The support for the Tri-Axis bars is different from the stock bars support. Why not call your dealer for the 660 part number.
Artillery lends dignity to what would
otherwise be a vulgar brawl.
******************************
Cognac 2014 RT-S
-
I have a 2014 rt ltd also and installed the tri axis handlebars.the mount for the 660 garmin is 219400408.I got mine off of ebay,the part number the dealer had was different and they knew this part number was the one I needed as they had did installs on 2014's.They were not able to obtain any more of that part number from BRP at that time,Do some research their still out there laying around a lot of dealers.
-
I have tri axis bars and I am using a regular window mount with a hole drilled through the suction cup. There is a center hole on the bars that I screwed the base to. Looks good. Saved a lot of money.
Sent from my SM-G935P using Tapatalk
-
Thank you!! This cleared up some confusion at my dealer who is installing some tri axis bars on my 2013 Spyder RT!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|