-
BajaRon sway bar question
The kit I received has two bolts with it but the instructions do not say what there are for. Anyone have an idea?
mark
-
Originally Posted by Nyparrothead
The kit I received has two bolts with it but the instructions do not say what there are for. Anyone have an idea?
mark
I just had the sway bar installed on my 2015 RT and my directions say to replace the old bolts with the new ones. Hope this helps.
Mike
-
Very Active Member
Bolts
I believe those bolts are meant to replace the upper heim bolts.
That's the bolts used to connect the sway bar to the heim links.
Hope this helps.
Butch
-
Originally Posted by DriftersWay
I believe those bolts are meant to replace the upper heim bolts.
That's the bolts used to connect the sway bar to the heim links.
Hope this helps.
Butch
They are to replace the bolts that connect the swaybar to the Heim links. Just did mine last week.
-
Active Member
Lower bolts. Threads go to the outside.
2014 RT Limited, Cognac (Wife's) Hand Brake, Heated Comfort Seat, iPhone Cable in Glove Box, Baja Ron Swaybar, Spyder Pop's BumpSkid.
2014 RT-S, Cognac (Mine) Tri Axis Bars, Comfort Seat, BRP Backrest, iPhone Cable in Glove Box, Baja Ron Swaybar, Spyder Pop's BumpSkid, Spyder2go Drink Holder.
-
Anyone have torque values for the sway bar install?
mark
-
Originally Posted by Nyparrothead
Anyone have torque values for the sway bar install?
mark
choke up on 3/8" socket handle and then wrist tight !!!
or more precisely, 1/4" turn from max finger tight
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|