Results 1 to 7 of 7
  1. #1
    Gonenuts
    Guest

    Default Sway bar installed?

    So my new Bajaron Sway Bar arrived todaybut I called a dealer closest to the SLC area and they stated they don't install an aftermarket sway bar . Does anyone know of a shop that will?

    Thanks for looking?

  2. #2
    Very Active Member Chupaca's Avatar
    Join Date
    Oct 2012
    Location
    San Diego, CA.
    Posts
    30,910
    Spyder Garage
    1

    Default Little checking..!!

    perhaps another dealer. Not sure where west jordan isbut it is not that hard a job to do. If you have some mechanically inclined sould they could do it. The instructions are clear and simple...
    Gene and Ilana De Laney
    Mt. Helix, California

    ​2012 RS sm5

  3. #3
    SpyderLovers Sponsor cptjam's Avatar
    Join Date
    Jul 2010
    Location
    Las Vegas, NV
    Posts
    2,724
    Spyder Garage
    0

    Default Me

    Bring it down to Las Vegas . We can install it and laser align it! Call Ann to set it up. Joe
    Joe Meyer



    Dealer for the Outlaw/ROLO laser Alignment system

  4. #4
    Active Member Hecam17's Avatar
    Join Date
    Sep 2011
    Location
    Acworth, GA
    Posts
    136
    Spyder Garage
    0

    Default had it doen twice

    What one will or will not install is up to them, but
    my 2010 had a Baja Ron bar installed in Cartersville, GA
    my 2015 has a Baja Ron bar installed in Birmingham, AL
    might be time to look farther down the dealer list

  5. #5
    Pragmatic Member Pampurrs's Avatar
    Join Date
    Mar 2015
    Location
    San Tan Valley, AZ
    Posts
    2,071
    Spyder Garage
    0

    Default

    Quote Originally Posted by Gonenuts View Post
    So my new Bajaron Sway Bar arrived todaybut I called a dealer closest to the SLC area and they stated they don't install an aftermarket sway bar . Does anyone know of a shop that will?

    Thanks for looking?
    Try a different dealer. The dealer where I bought mine installed the Bajabar for me. The tech said he's done dozens of them, and had it done if 45 minutes.

    Pam



    • 2015 RT-S Special Series / Red & Black
    • Baja Ron Sway Bar
    • Utopia Backrest
    • F4 Customs tall and wide vented windshield
    • Stebel Super Loud Air Horn
    • Baker Built Air Wings
    • LaMonster Highway Pegs
    • SpyderPops Exhaust Block Off Plate
    • SpyderPops KOTT Grill
    • SpyderPops Belt Guard
    • Cat Bypass
    • Laser Alignment by Squared Away
    • TricLED Fender Lights
    • General Altimax RT43 rear tire
    • Dual flag holder
    • Mud Flap
    • A$$hole seeking missile system




  6. #6
    Registered Users
    Join Date
    Aug 2014
    Location
    Grenada, MS
    Posts
    54
    Spyder Garage
    0

    Default Sway bar installed?

    You can do it yourself, but you have to raise front end 20-22" off the floor and have all that clearance in the center.

  7. #7
    Gonenuts
    Guest

    Default Done, did it!

    Found a motorcycle lift on line for a mare $35, ran down to Harbor Freight and grabbed some jack stands. With Ron's instructions in hand, reading glasses on head, away I went. The only trick was raising the few extra inches above what the jack would go to get the old bar out and the new in. I let the Red Neck out a little and engineered a way for a little higher lift, swapped the bars then lowered to the safe height to finish.

    How did we accomplish anything before internet, good folks on this web site and YouTube videos?

    Thanks to all replied or had other helpful sway bar install post!


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •