Results 1 to 15 of 15
  1. #1
    Registered Users Seanpham79's Avatar
    Join Date
    Mar 2011
    Location
    Atlanta, GA USA
    Posts
    30
    Spyder Garage
    0

    Default SaddleBag/TB duel exhaust clearence.

    If you ever wondered if Givi V35 saddle bags (Brp R35 bags are the same bags with BRP logo stamped on it) would clear Twos Brothers duel exhaust..Here you go.
    Also if you buy the Givi V35 bags..they're cheaper then if you buy from brp. AND....the Color trim panels from BRP will fit on the Givi V35 as you can see from the pics. =D

  2. #2
    Very Active Member Firefly's Avatar
    Join Date
    Feb 2009
    Location
    Ceresco, Michigan
    Posts
    8,629
    Spyder Garage
    0

    Default

    Looks nice. What are you using for rear blinkers?

    While the brp setup is a bit more - the quick release racks are worth it IMO.

    Spyder #1 - 2008 GS SM5 Premier Edition #1977. RIP after 80,000 miles.
    Spyder #2 - 2012 RT SM5. Traded in after 24,000 miles.
    Spyder #3 - 2015 F3 SM6. Put 13,000 miles on and sold it.
    Spyder #4 - 2017 F3 SM6. Too good of a deal to pass up!

  3. #3
    Registered Users Seanpham79's Avatar
    Join Date
    Mar 2011
    Location
    Atlanta, GA USA
    Posts
    30
    Spyder Garage
    0

    Default

    Quote Originally Posted by Firefly View Post
    Looks nice. What are you using for rear blinkers?

    While the brp setup is a bit more - the quick release racks are worth it IMO.
    These are also the Quarter-turn/single button quick release. They are exactly the same as the BRP R-35

  4. #4
    Registered Users Seanpham79's Avatar
    Join Date
    Mar 2011
    Location
    Atlanta, GA USA
    Posts
    30
    Spyder Garage
    0

    Default

    Quote Originally Posted by Seanpham79 View Post
    These are also the Quarter-turn/single button quick release. They are exactly the same as the BRP R-35
    pic

  5. #5
    Very Active Member Firefly's Avatar
    Join Date
    Feb 2009
    Location
    Ceresco, Michigan
    Posts
    8,629
    Spyder Garage
    0

    Default

    Quote Originally Posted by Seanpham79 View Post
    These are also the Quarter-turn/single button quick release. They are exactly the same as the BRP R-35
    Can't tell from those pics--- so you're saying the RACKS come off with the quarter-turn quick release?

    Where's your rear blinkers then??
    See where the BRP ones put the blinkers.....

    Here's the BRP ones:

    Rack ON:
    http://www.spyderlovers.com/forums/a...3&d=1243951727

    Rack OFF:
    http://www.spyderlovers.com/forums/a...8&d=1243951858

    Rack and bag removed -- 30 seconds:
    http://www.spyderlovers.com/forums/a...2&d=1243951921

    Spyder #1 - 2008 GS SM5 Premier Edition #1977. RIP after 80,000 miles.
    Spyder #2 - 2012 RT SM5. Traded in after 24,000 miles.
    Spyder #3 - 2015 F3 SM6. Put 13,000 miles on and sold it.
    Spyder #4 - 2017 F3 SM6. Too good of a deal to pass up!

  6. #6
    Blazing Member fastfraser's Avatar
    Join Date
    Feb 2009
    Location
    Orangeville, Canada
    Posts
    3,994
    Spyder Garage
    0

    Default

    Sweet set up with the Corbin Smugglers trunk and the Carbon fiber rear fender .
    Happy Owner






  7. #7
    Active Member sledhead's Avatar
    Join Date
    Mar 2010
    Location
    Minnesota
    Posts
    178
    Spyder Garage
    0

    Default

    Quote Originally Posted by Firefly View Post
    Can't tell from those pics--- so you're saying the RACKS come off with the quarter-turn quick release?
    I am wondering the same thing... I just bought the BRP bags BECAUSE I thought the GIVI's didn't have the quick release mounting racks... AND the skins wouldn't fit. Oh well....

  8. #8
    Registered Users Seanpham79's Avatar
    Join Date
    Mar 2011
    Location
    Atlanta, GA USA
    Posts
    30
    Spyder Garage
    0

    Default

    Quote Originally Posted by sledhead View Post
    I am wondering the same thing... I just bought the BRP bags BECAUSE I thought the GIVI's didn't have the quick release mounting racks... AND the skins wouldn't fit. Oh well....
    I was reading your replies wrong. The bags are remove-able but the racks are not. I wonder if the the BRP racks would clear the duel exhaust? But the panels are universal fit

  9. #9
    Member
    Join Date
    Oct 2013
    Location
    BURLINGTON CT
    Posts
    1
    Spyder Garage
    0

    Default Mounting Kit Used?

    I purchased the BRP saddlebags and mounting hardware and installed them. My bag is hitting my Two Brothers exhaust and it looks much lower than yours. I have the quick release frames that came with the bags. Please advise if you did modifications or have a different model of the frames.


    Quote Originally Posted by Seanpham79 View Post
    If you ever wondered if Givi V35 saddle bags (Brp R35 bags are the same bags with BRP logo stamped on it) would clear Twos Brothers duel exhaust..Here you go.
    Also if you buy the Givi V35 bags..they're cheaper then if you buy from brp. AND....the Color trim panels from BRP will fit on the Givi V35 as you can see from the pics. =D

  10. #10
    MOgang Member Yazz's Avatar
    Join Date
    Nov 2009
    Location
    Cypress, Texas
    Posts
    3,030
    Spyder Garage
    0

    Default

    Quote Originally Posted by SANDMAN1917 View Post
    I purchased the BRP saddlebags and mounting hardware and installed them. My bag is hitting my Two Brothers exhaust and it looks much lower than yours. I have the quick release frames that came with the bags. Please advise if you did modifications or have a different model of the frames.
    Quote Originally Posted by Seanpham79 View Post
    I was reading your replies wrong. The bags are remove-able but the racks are not. I wonder if the the BRP racks would clear the duel exhaust? But the panels are universal fit
    Heard of someone lowering the upsweep the the pipe...
    Joy
    Very Happy Ryder...
    '09 Phantom and a '15 F3-S

    If you don't slow down, they can't catch you..
    ​If you don't give up, they can't win.
    What a long strange journey its been.





  11. #11
    Registered Users
    Join Date
    Apr 2014
    Location
    Augusta, GA
    Posts
    55
    Spyder Garage
    0

    Default

    see this is enlightening to me simply because now i know i can buy the saddlebag liners for the givi and be good to go on this bike

  12. #12
    Registered Users
    Join Date
    Apr 2014
    Location
    Augusta, GA
    Posts
    55
    Spyder Garage
    0

    Default

    Quote Originally Posted by Seanpham79 View Post
    If you ever wondered if Givi V35 saddle bags (Brp R35 bags are the same bags with BRP logo stamped on it) would clear Twos Brothers duel exhaust..Here you go.
    Also if you buy the Givi V35 bags..they're cheaper then if you buy from brp. AND....the Color trim panels from BRP will fit on the Givi V35 as you can see from the pics. =D
    its funny because two brothers specifically states that the dual will not work with the luggage. good to know, because i wanted to get these... thanks for this!

  13. #13
    Registered Users NZSpyderRyder's Avatar
    Join Date
    Mar 2014
    Location
    Waiuku, New Zealand
    Posts
    354
    Spyder Garage
    0

    Default Height

    Your saddle bags are sitting a lot higher than the BRP oem setup and that is why you can fit the TBR twin exhaust.
    The TBR website says that the dual/twin system "will not work with factory luggage". That's why I opted for the single canister.
    2013-can-am-spyder-st-limited-for-comfort-touring_2.jpgTBR slip on carbon canister.jpg
    Alan:
    2013 Spyder ST Limited
    TBR
    Black Series Slip-On Exhaust with M-5 Carbon Canister and P1X power tip and black bolt kit
    Fox Podium shocks
    BRP Carbon black sports rack & backrest
    Custom Dynamics LED converted taillights & black tag bolts
    WrapMySpyder carbon dash kit & GT stripes & graphics
    Bestem USA carbon side fairings, belt guards & under tail
    Procoat NZ powder coated wheels
    Hydrographics NZ carbon dipped front suspension covers, billet caps and dash surround
    Spyderpops 3D SS Grille set

  14. #14
    Registered Users
    Join Date
    Apr 2014
    Location
    Augusta, GA
    Posts
    55
    Spyder Garage
    0

    Default

    Quote Originally Posted by NZSpyderRyder View Post
    Your saddle bags are sitting a lot higher than the BRP oem setup and that is why you can fit the TBR twin exhaust.
    The TBR website says that the dual/twin system "will not work with factory luggage". That's why I opted for the single canister.
    2013-can-am-spyder-st-limited-for-comfort-touring_2.jpgTBR slip on carbon canister.jpg

    yeah i was just looking again at his pictures... his saddlebags sit 2-3" higher than the brp version. so... guess i'll go with the single as originally planned

  15. #15
    Registered Users
    Join Date
    Jul 2011
    Location
    Kresgeville PA
    Posts
    65
    Spyder Garage
    0

    Default

    Quote Originally Posted by Seanpham79 View Post
    If you ever wondered if Givi V35 saddle bags (Brp R35 bags are the same bags with BRP logo stamped on it) would clear Twos Brothers duel exhaust..Here you go.
    Also if you buy the Givi V35 bags..they're cheaper then if you buy from brp. AND....the Color trim panels from BRP will fit on the Givi V35 as you can see from the pics. =D
    Can you post the part numbers or sku for the bags and the mounting bracket you used? Also where you found the best price on them. Thanks.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •