-
Very Active Member
Any insights on removing the rear seat on an F3-T?
I went out to check pressures and air up tires and shock before riding today. Pressed and turned key to remove rear seat and there is NO resistance of moving a cable that is felt when opening frunk. Dismantled area around the ignition switch to expose the cable and reattach it to the key mechanism- no love. So ended up prying up the left side of the rear seat and aired up shock, but have been unable to get the actual seat unlatched. Any suggestions on how to get to the seat release mechanism would be greatly appreciated.
Al in Kazoo
Last edited by Peter Aawen; 03-15-2023 at 06:43 PM.
Reason: Expanded title to briefly ask the question... ;-)
All the great movements in the world began with a cup of coffee!
2018 F3-T
My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.

-
Very Active Member
Sounds like the cable has come undone at the latch which on the rear of the seat. Hopefully someone will come up with a way to get it off so that you can see what the prob is.
-
Active Member
In my short time here I have seen quite a few posts on this and that frunk latch.
I guess it occurs quite a bit.
Cables becoming detached and the latch cluster becoming hard to work, jamming and snapping cables.
2 things.
Once you do succeed on opening the latch consider attaching a tether to it.
And most importantly ensuring the latch is in good working condition by inspecting and lubing the mechanism when its open.
Have a look through these and you will find stuff on hooking the latch with a bent wire and install a tether directly to the latch.
https://www.spyderlovers.com/forums/...archid=3771363
-
Active Member
Any luck on your rear seat latch? For what it's worth, when I got a new seat, I had to move the latch thing from the old to the new seat base. I must have put it on too far/tight. To get the latch to let go, I had to be sitting down hard on the seat while someone turned the key. My weight took pressure off the latch bolt and it released.
_________________________________
GR Horst - Reading, Pennsylvania, U.S.A.
-
Active Member
 Originally Posted by GRHorst
Any luck on your rear seat latch? For what it's worth, when I got a new seat, I had to move the latch thing from the old to the new seat base. I must have put it on too far/tight. To get the latch to let go, I had to be sitting down hard on the seat while someone turned the key. My weight took pressure off the latch bolt and it released.
Well I wouldn't hold ya breath there as I was wondering the same.
After a quick search of previous posts shows it appears that IGETAROUND is not one to to GETAROUND to posting any updates on what he has asked for assistance with.
Is that what they mean when they say its all Kazoo?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|