Hope everyone had a great Thanksgiving.

I did searches and have read about these items here, but so many different answers.

Replaced all three tires with 175/55r15 Vredestein and Altimax Rt45. Took them to 5 tire places and nobody can balance them. Had some dynabeads left over from one of the other bikes so installed them in the rear. Up front have read they don’t perform well. So installed 10 ounces of Ride On in each tire.

Went for a test drive and the shaking and wheel bounce begins a 50mph. Gets worse from 50-55 and at 60 to 70, the front wheels bounce violently and the handle bars shake like a paint mixer.

Between this and trying to get the belt aligned, not too pleased. It keeps changing when I tighten the wheel. I tighten towards the front. Ended up with the belt off the inner rear pulley at 4mm and belt tension on the ground at 200 on the Krikit.

Can I get the front tires spin balanced with the Ride On installed?

Secondly, there are many different opinions on belt tension on this forum. Can I run the 200 without problems?
Thanks.