Results 1 to 8 of 8
  1. #1
    Active Member
    Join Date
    Jul 2015
    Location
    Edmonton AB Canada
    Posts
    209
    Spyder Garage
    0

    Default 7jurock on F3 Ltd size suggestion?

    I am interested in the size 7jurock shield you use if you are tall. I am 6’4” and want to look over the shield. Would the 24” wideboy be to tall? The 7jurock site doesn’t seem to have any size to height advice or measurements. Let me know how tall you are, which size screen you use and if you look over or thru. Thanks everyone

  2. #2
    Very Active Member Peteoz's Avatar
    Join Date
    Jun 2016
    Location
    Harrington, Australia
    Posts
    2,601
    Spyder Garage
    1

    Default

    You might like to add your inleg length to that question, Gc. Someone the same height as you may have a much shorter or longer inleg, meaning the screen won’t fit as you would like. Have you tried calling 7Jurock? They may be able to supply exactly the info you need re measurements.

    Pete
    Harrington, Australia

    Set up for Tall.... 6'7", 300lbs, 38"inleg.
    Lamonster Black Diamond Boards/H’way pegs/Brake rod in Position#5
    Russell Daylong custom seat with driver 1.5" rearset, 2” taller
    Lamonster Billy Club handlebars, F4 25" screen, Wilber 630/640 shocks
    ECU Xtreme Stage 2 retune, Bajaron Stabiliser Bar
    Kuhmo KH17 175/60 fronts-18psi / KU22 205/55 rear-18psi
    2016 F3 Limited , Rapid Red

  3. #3
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    1,961
    Spyder Garage
    1

    Default

    7Jurock measures height from to to bottom of the plastic along the centerline. They will make any height and w/s you want and not charge more than the going price that height. Always get the flip, they work! The flip allows a shorter w/s to perform as if it was taller.
    To check for the height you want, clip or tape a piece of cardboard to the top of the w/s and go riding. Raise or lower it until you get the height you want. That's it! Call them, they are easy to work with. And yes, I have one of their customs made to my specs. It's 9" wider than stock and uses the stock brackets.

    DSCN2869.jpg
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
    2017 F3 Limited , Red, Black & Chrome

  4. #4
    Active Member
    Join Date
    Jul 2015
    Location
    Edmonton AB Canada
    Posts
    209
    Spyder Garage
    0

    Default

    Good suggestion. For my height I think my inseam is on the short side at 34”

  5. #5
    Active Member
    Join Date
    Jul 2015
    Location
    Edmonton AB Canada
    Posts
    209
    Spyder Garage
    0

    Default

    Quote Originally Posted by RICZ View Post
    7Jurock measures height from to to bottom of the plastic along the centerline. They will make any height and w/s you want and not charge more than the going price that height. Always get the flip, they work! The flip allows a shorter w/s to perform as if it was taller.
    To check for the height you want, clip or tape a piece of cardboard to the top of the w/s and go riding. Raise or lower it until you get the height you want. That's it! Call them, they are easy to work with. And yes, I have one of their customs made to my specs. It's 9" wider than stock and uses the stock

    DSCN2869.jpg
    . Thanks I will try the cardboard tip. Is yours based off of the tall boy model?

  6. #6
    Active Member johnv50's Avatar
    Join Date
    Jun 2018
    Location
    Tonawanda, NY
    Posts
    132
    Spyder Garage
    0

    Default

    As per the recommendations of RICZ I had 7Jurock make a custom wider shield, but I am shorter than you. If you call them they may be able to make what you want, or at least make a recommendation.

    johnv
    USMC RETIRED

    BLUE KNIGHTS NYV

  7. #7
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    1,961
    Spyder Garage
    1

    Default

    Quote Originally Posted by Gcclubs View Post
    . Thanks I will try the cardboard tip. Is yours based off of the tall boy model?
    No...it's my own design.
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
    2017 F3 Limited , Red, Black & Chrome

  8. #8
    Very Active Member Rattlebars's Avatar
    Join Date
    Mar 2017
    Location
    Girard OH (summer) Greenville SC (winter)
    Posts
    810
    Spyder Garage
    1

    Default

    One can add an 11.5 inch (280mm) Moparty extender which adds much more for height protection while still allowing one to look through the space as if looking over the shield. I was particularly impressed by its ability to prevent the buffeting on the helmet by this addition. I have also added Slingshot extenders to the side. You will find that when you protect from the front, you will get a BACKDRAFT which is a wind from the rear as the vacuum from behind the shield will suck air onto your back and neck. I encountered that with my GL1800 and worked through a few solutions to that on my BACKDRAFT page.

    https://www.rattlebars.com/chetswing/backdraft.html



    Full details & links on my page 2016 F3-T and many how to's under AIR CONTROL.
    to see my 2016 F3-T and many how to's
    2016 F3-T SE6 Roadster , Extended brake pedal for which I drilled out the brake rod yolk to lower it and added spacers to lift it slightly Black/Grey

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •