Results 1 to 18 of 18

Thread: Gas cap

  1. #1
    Member
    Join Date
    Oct 2019
    Location
    Chelsea, AL
    Posts
    12
    Spyder Garage
    0

    Default Gas cap

    What is the DEAL with this gas cap (new owner, F3-S)? To get it closed I have to use both hands and get up on the right peg to put my weight on it. I tried lubing it with some WD-40 but that didnít help much. I see where LaMonster has a replacement. Any ideas from Spyder experts before I call in my order?
    Thanks in advance.

  2. #2
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    631
    Spyder Garage
    1

    Default

    I had the same problem. I took it apart (placing a cloth over the hole) and filed the spring latch down for a looser fit. It closes easily now.
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.

  3. #3
    Active Member Gwolf's Avatar
    Join Date
    Apr 2019
    Location
    Florida Swamp
    Posts
    495
    Spyder Garage
    2

    Default

    F3-S mine closes easy. Press down with two fingers, it latches, turn the key back, and it is done.

  4. #4
    Member
    Join Date
    Oct 2019
    Location
    Chelsea, AL
    Posts
    12
    Spyder Garage
    0

    Default

    Thank you. I’ll give it a try.

  5. #5
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    631
    Spyder Garage
    1

    Default

    Quote Originally Posted by Gwolf View Post
    F3-S mine closes easy. Press down with two fingers, it latches, turn the key back, and it is done.
    Lucky you. You got one without that problem. But others, including myself had to deal with caps that are difficult to close. Fortunately, I found the solution and I hope that helps those like the OP with that all too common problem.
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.

  6. #6
    SpyderLovers Sponsor SpyderAnn01's Avatar
    Join Date
    Jun 2010
    Location
    Las Vegas
    Posts
    12,776
    Spyder Garage
    0

    Default

    You need to turn the key to 2 o’clock position before attempting to close it. If you keep it clean and lubed and put the key in this position you will have no troubles!

    2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
    2014 RTS-SM6 123,600 miles Sold 11/2017
    2014 RTL-SE6 8,600 miles
    2011 RTS-SM5 5,000 miles
    2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
    2010 RTS-SM5 59,148 miles
    2010 RT- 622

  7. #7
    Active Member troop's Avatar
    Join Date
    Aug 2019
    Location
    Stoughton, WI
    Posts
    148
    Spyder Garage
    0

    Default

    Yup, as above. Push down with two fingers to open and 2 o'clock and two fingers to close. Just a habit process.
    2019 F3-S SE6
    --------------------------------
    Madstad 14" dark gray/20" light gray windshields
    TricLED aux lights/inner front fender aux lights
    Spyderlovers USB/12V powerport
    Baldwin cat delete pipe
    K&N air filter/Drilled airbox cover
    Big Bike Parts rider backrest
    Shad luggage/mounts
    Factory heated grips
    Two up shock
    H4 LED headlight bulbs
    Detachable passenger seat storage box
    ** Winter Upgrades Coming **
    1.) Upgraded swaybar
    2.) Dynojet PV3
    3.) Highway Pegs
    4.) Run/Brake/Turn rear tail light strip

  8. #8
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    631
    Spyder Garage
    1

    Default

    Ann and Troop....In a perfect Spyder world, those suggestions work. But when you get one with a cap that requires a hydraulic ram to close, it's a different ballgame that requires a modification.
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.

  9. #9
    Active Member SPYMAN's Avatar
    Join Date
    Nov 2007
    Location
    Nixa, Missouri 65714
    Posts
    333
    Spyder Garage
    0

    Default

    Lamonster IPS F3 Keyless Fuel Cap Assembly

    httphttp://www.lamonstergarage.com/c...bly-lamonster/
    PE #2735
    RUBBER SIDE DOWN SHINY SIDE UP!!!!!!!!!!
    Never ride faster than your Angel can fly...

  10. #10
    Very Active Member JKMSPYDER's Avatar
    Join Date
    Dec 2012
    Location
    Murphy, NC
    Posts
    1,129
    Spyder Garage
    1

    Default

    I had the same problem when my F3-S was new. Took apart the cap and lubed the spring and seal. Was better but not great. Finally ordered Lamont’s keyless gas cap. Problem solved forever.
    2015 F3-S Can-Am Red, SE6

    Spyderpops Bumpskid
    Ram Mount X Grip
    Spyderpops Brake/Run/Turn Signal LED's
    Madstad Windshield
    SmoothSpyder Backrest and Belt Tensioner
    Baker Bilt Rear Luggage Rack
    Lamonster Garage LED Fog Lights and Headlights


    2013 ST-S retired 1/9/16 at 25,061 miles

  11. #11
    Very Active Member Highwayman2013's Avatar
    Join Date
    Nov 2012
    Location
    North Las Vegas, NV
    Posts
    4,393
    Spyder Garage
    1

    Default

    Well, at the risk of attack. The WD40 works on mine.
    2016 F3 Limited
    2019 Ryker Rally
    2014 Suzuki V Strom 650

  12. #12
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    631
    Spyder Garage
    1

    Default

    I live in a blue, sanctuary, crime ridden city and I don't want to switch to a keyless cap. All it took was taking it apart and filing down the latch. I did try lubing originally, but that didn't help at all. Some caps come so tight that I have no idea how they closed it at the factory. On my first fillup, I found it impossible to close the cap and had to ride home and remedy the problem.
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.

  13. #13
    Member
    Join Date
    Oct 2019
    Location
    Chelsea, AL
    Posts
    12
    Spyder Garage
    0

    Default

    I will be dipped...! Key to two o’clock position and it closes no problem! You guys are smarter than you look! ��

  14. #14
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    631
    Spyder Garage
    1

    Default

    Quote Originally Posted by Corvet View Post
    I will be dipped...! Key to two o’clock position and it closes no problem! You guys are smarter than you look! ��
    I was assuming you knew that and your cap was as tight as mine was. Glad this came to a good ending. Thanks Troop for mentioning that.The good news is, peeps now know what to do if they buy a new Spyder with a hard to close gas cap.
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.

  15. #15
    Active Member deer30084's Avatar
    Join Date
    Jun 2016
    Location
    Tallahassee, FL
    Posts
    174
    Spyder Garage
    0

    Default

    Quote Originally Posted by Corvet View Post
    What is the DEAL with this gas cap (new owner, F3-S)? To get it closed I have to use both hands and get up on the right peg to put my weight on it. I tried lubing it with some WD-40 but that didnít help much. I see where LaMonster has a replacement. Any ideas from Spyder experts before I call in my order?
    Thanks in advance.
    I have an RV with a slide out. Occasionally I put RV slide out lube on the rubber seals of the slide out so it slides in and out easily and protects the seals. I put a little bit of that on my fingers, put it on the rubber seal of my F3 gas cap months ago, and it works fine. Still haven't had the need to re-lube it.
    John F.
    Tallahassee, FL

    2015 Spyder F3 SE6, black
    BRP Driver/passenger Footboards
    BRP Adjustable Passenger Backrest
    Blue Ridge Windshield
    MRA X-Creen Tour, clear, clamp-on
    H4 LED Headlights
    F3 LED Fog Light Kit, LED Amber Halo Ring Kit, LED Tail Lights, F3 Rear run/brake/turn LEDs
    Easy Brackets
    Leatherworks, Inc. 120 Special Slight Angle Saddlebags
    Custom Dynamics Front Mud Flap LED lights, Street Magic Front Fender Tips, Double Feature Lens
    2-up rear shock
    Idler pulley kit

  16. #16
    Active Member
    Join Date
    Dec 2017
    Location
    usa
    Posts
    37
    Spyder Garage
    0

    Default

    Quote Originally Posted by RICZ View Post
    Ann and Troop....In a perfect Spyder world, those suggestions work. But when you get one with a cap that requires a hydraulic ram to close, it's a different ballgame that requires a modification.
    Mine did not come from a perfect world - when new and not lubed I fought it many times.
    Lube it (I use waterproof plumbers grease) and turn the key as Ann suggests - absolutely no problems since !

  17. #17
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    631
    Spyder Garage
    1

    Default

    Quote Originally Posted by als View Post
    Mine did not come from a perfect world - when new and not lubed I fought it many times.
    Lube it (I use waterproof plumbers grease) and turn the key as Ann suggests - absolutely no problems since !
    I guess mine came from an even less perfect world as nothing helped short of filing the latch piece down. Being either lazy or efficient,, I tried the lubing bit first, and still, no go. I'm happy that I know which end of the screwdriver is the handle and can remedy mechanical problems. Thanks dad.
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.

  18. #18
    Very Active Member ABQSpyder's Avatar
    Join Date
    Jun 2013
    Location
    Green Valley AZ.
    Posts
    601
    Spyder Garage
    0

    Default

    Find yourself some Plastic lubricant.
    I had same problem used my old XEROX plastic lube about a year ago and works great Key at 2 0'clock

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •